ZKTeco Saturn-S1000 Series User Manual
  1. Manuals
  2. Brands
  3. ZKTeco Manuals
  4. Turnstiles
  5. Saturn-S1000 Series
  6. User manual
ZKTeco Saturn-S1000 Series User Manual

ZKTeco Saturn-S1000 Series User Manual

Hide thumbs Also See for Saturn-S1000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
mTS1000 Series Tripod Turnstile
User Manual
P a g e
| 1
Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Saturn-S1000 Series and is the answer not in the manual?

Questions and answers

Related Manuals for ZKTeco Saturn-S1000 Series

Summary of Contents for ZKTeco Saturn-S1000 Series

  • Page 1 Series Tripod Turnstile User Manual P a g e Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 2 Copyright © 2024 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").
  • Page 3 Saturn-S1000 Series User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
  • Page 4 User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
  • Page 5 3. Make sure the switch's wiring sequence is correct after maintenance. Please make sure that the power has been disconnected before you wire, install or dismantle the  device. P a g e Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 6 Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to  return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs. P a g e Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 7 SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY.  The instructions shall require connection of the equipment protective earthing conductor to the  installation protective earthing conductor. P a g e Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 8: Table Of Contents

    IRING ETHODS 5.4 M ........................37 AIN AND ONNECTION ABLE 5.5 P ........................37 OWER AND WITCH IRING 5.6 S ..........................39 YSTEM IRING IAGRAM 6 OPERATION PROCESS ..........................40 P a g e Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 9 8 MAINTENANCE ............................53 8.1 C ............................53 HASSIS AINTENANCE 8.2 M ..........................53 OVEMENT AINTENANCE 8.3 P ........................... 53 OWER UPPLY AINTENANCE 9 TROUBLESHOOTING ..........................54 10 PACKING LIST ............................55 P a g e Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 10: Overview

    User Manual Overview Unveiling the ZKTeco Saturn Series, an innovative swing barrier turnstile designed for an paralleled passage experience. With its sophisticated design, the Saturn Series is available in range of striking colors including Pearl White (PWH), Space Gray (SGY), Carbon Black (CBK), Bay Blue (BBLE) and Mist Brown (MBW), making it blends seamlessly with both indoor and outdoor applications.

  • Page 11: Key Features

    0.8m, effectively preventing unauthorized crossings. Additionally, the Saturn series is fortified with 4 pairs of infrared sensors for double anti-crushing protection and a leakage protection switch to protect against electrical hazards. P a g e | 11 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 12: Specification

    Saturn-S1000 Series User Manual Specification 1.2.1 Appearance  Saturn-S1000: Unit: mm Front View Side View 1200 1200 Top View Bottom View Mounting Holes 24x14mm P a g e | 12 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 13 Saturn-S1000 Series User Manual  Saturn-S1200: Unit: mm Front View Side View 1000 1200 Top View Bottom View 1000 1000 Mounting Holes 24x14mm P a g e | 13 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 14 Single-lane Standard Lane Wide Lane / ADA Lane Dual-lane Standard Lane Wide Lane / ADA Lane Multi-lane Standard Lane Wide Lane / ADA Lane P a g e | 14 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 15: System Components

    Saturn-S1000 Series User Manual 1.2.2 System Components  Saturn-S1000:  Saturn-S1200: P a g e | 15 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 16 Used to indicate the Entry/Exit passage status It detects the position of the pedestrian and plays a role in Infrared Sensor ensuring safety and protection Core Component Operating components of the turnstile P a g e | 16 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 17: Technical Specifications

    Movement Speed Movement Accuracy Clutch Polycarbonate +2.5D tempered glass Lid Material Lid Options Streamlined under mount options: QR Code / RFID Authentication Surface mount option: Facial Authentication Methods P a g e | 17 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 18 ZKBio CVAccess / ZKBio CVSecurity (Depends on equipped access controller) Voltage free contact input for fire alarm fail state Safety Features automatic swing barrier open during power off Security Features Anti-tailgating, anti-pinch P a g e | 18 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 19: Application Environment

    Infrared Sensor: It detects the position of the pedestrian and plays the role of safety protection.  Turnstile Control Board: The Turnstile control board is the system ’ s control center that receives  P a g e | 19 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 20 Saturn-S1000: Infrared Sensors*4 (IR Sensor Transmitter) Infrared Sensors*4 (IR Sensor Receiver) Main device Sub device  Saturn-S1200: Infrared Sensors*4 (IR Sensor Receiver) Infrared Sensors*4 (IR Sensor Transmitter) P a g e | 20 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 21: Authentication Methods

    Access Controller. When a user presses his / her card on the card reading area, the device enters card authentication mode. P a g e | 21 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 22: Qr Code Verification

    Try to keep the face in the centre of the screen during authentication. Please face towards the camera and stay still during face registration. Recommended Standing Posture and Facial Expression: P a g e | 22 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 23 Saturn-S1000 Series User Manual Note: Please keep your facial expression and standing posture natural while enrollment or verification. NO ENTRY RFID RFID P a g e | 23 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 24: Installation

    The reference figure is shown below: P a g e | 24 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 25: Installation Cabinet

    1. Remove the four screws hidden under the top lid, then remove the top lid. 2. Remove the four screws of the expansion screw cover plate under the bottom beam, and then remove the cover plate. P a g e | 25 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 26: Determine The Mounting Location

    1130 1050 Mounting Holes Mounting Holes 24x14mm 24x14mm Wire Holes Wire Holes 50x50mm 50x50mm Standard Lane Wide Lane / ADA Lane P a g e | 26 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 27 3. Make sure the bolts are placed in place. Use a hammer to tap the bolts into place, if needed. Percussion Drill Place bolts into mounting holes Concrete Bolt 60mm P a g e | 27 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 28 3. Tighten the nuts to hold the cabinet in place. Don't tighten it completely until after you're sure it won't move anymore. The finished result is shown below: P a g e | 28 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 29 Saturn-S1000 Series User Manual 100mm 1200mm Washer Mounting bracket 50mm (Already welded to the device) P a g e | 29 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 30 1. It is recommended that warning lines be marked on the ground and used to alert users. 2. A warning line can alert users to wait outside the line until the previous user completes the verification process and passes through the turnstile. P a g e | 30 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 31: Accessory Installation

    2. Pass the mounting bracket through the mounting holes. 3. Place the gasket and nut and tighten the nut to secure the unit. 4. Adjust the unit to a suitable angle. P a g e | 31 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 32: Swing Barrier Installation

    Saturn-S1000 Series User Manual 3.5.2 Swing Barrier Installation 1. Push the swing barrier into the clamping block. 2. Lock the swing barrier with the screws. P a g e | 32 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 33: Terminal Description

    GND, PE, 24V 24V DC power supply input +5V, SC, GND, V Motor interface SA, SB, W, U +5V, A, B, Z, GND Encoder interface C+, C- Clutch Speaker P a g e | 33 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 34: Ir Sensor Board

    External fire port OR, OL, FI, GND Alarm, fire opening port 12V, GND 12V DC power supply input BAT, GND Backup firefighting power interface Main board communication interface P a g e | 34 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 35: Wiring Instructions

    Sub Device Sub Device Sub Device Main Device Main Device Main Device Single-lane Dual-lane 4 Lanes Sub Side 4 Lanes Main Side Multi-lane P a g e | 35 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 36: Slotting Position

    Multi-lane LANE1 & LANE3, Wiring connection LANE2 & LANE4, Wiring connection between M/S device, as shown between M/S device, as shown red/green dash lines red/green dash lines P a g e | 36 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 37: Main And Sub Connection Cable

    120VAC and 240VAC primary power must be hard wired in place (Note: must be grounded). It is strongly recommended that a licensed electrician perform this procedure in accordance with applicable local codes. P a g e | 37 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 38 Saturn-S1000 Series User Manual P a g e | 38 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 39: System Wiring Diagram

    Saturn-S1000 Series User Manual System Wiring Diagram P a g e | 39 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 40: Operation Process

    2. Credential Verification After the unit's power on self test is complete, you can test the door opening by pressing the ADD/ DEC button on the motherboard. P a g e | 40 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 41 The pedestrian can pass through the passage only after a valid card is successfully verified. P a g e | 41 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 42: Machine Operation

    01E003: Test mode (the digital LED displays "---" in the test mode)  01E004: Version number  02EXXX : Device Mode 02E001: Entry & Exit: access requires verification (Default)  P a g e | 42 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 43 02E003: Entry: free, Exit: access requires verification  ENTRY EXIT Fingerprint 02E004: Entry & Exit: free  ENTRY EXIT 02E005: Entry: free, Exit: prohibited  DO NOT OUT P a g e | 43 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 44 02E008: Entry: prohibited, Exit: free  DO NOT ENTRY EXIT 02E009: Entry & Exit: prohibited  DO NOT ENTRY DO NOT OUT 02E010: Entry & Exit: free  ENTRY EXIT P a g e | 44 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 45 This setting is used when the wing arm cannot fully close or shakes during operation. A larger number results in faster compensation speed. The Gate Closing Compensation Speed can be set between 0 and 50, with a default value of 12. P a g e | 45 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 46 13E001 : Wing arm close in place adjustment  13E002 : Right in place adjustment  13E003 : Left in place adjustment  P a g e | 46 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 47: Volume Setting

    Volume Setting is used for adjusting the volume of the device. The larger the number is set, the louder the volume. The valid value for Volume Setting can be set between 1 to 100 and the default value is 70. P a g e | 47 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 48: Light Mode

    Force Adjustment can be set between 10 to 100 and the default value is 50. 21EXXX : Fire Mode 21E000: Entry opening (Default)  21E001: Exit opening  P a g e | 48 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 49 The False Direction Entry (26E000) will only be effective when the Anti-pinch Area Setting is set to (25E001). 26E000: Close (For wing gates)  26E001: Only alarm (Default)  P a g e | 49 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 50 28E000: Last pair (Default)  28E001: Penultimate pair  Last IR Penultimate IR RFID RFID 29EXXX : Anti-pinch Action Setting 29E000: Stop  29E001: Open (Default)  P a g e | 50 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 51 31E001: Swing Barrier B (Default)  31E002: AA (Wing Gate)  31E003: BB (Wing Gate)  31E004: AB (Wing Gate)  31E005: BA (Wing Gate)  32EXXX : Swing arm selection P a g e | 51 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 52 Valid values are 0 to 4, and the default value is 3. 40EXXX : Infrared Logarithm The Infrared Logarithm can be set between 1 and 8, with a default value of 8. Greater than 8 becomes 22. P a g e | 52 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 53: Maintenance

    Perform the safety check on a weekly basis to ensure that the turnstile is safe and ready for user operation. P a g e | 53 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 54: Troubleshooting

    When the gate is self-tested, the In the process of self-test, there are obstacles, swing arm is not in the normal please remove the obstacles, restart the self-test closing position! after power-on! P a g e | 54 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 55: Packing List

    The package consists of the following items:  Saturn-S1000: Saturn-S1000 (Main and Sub) Power Cable Card Expansion Screw M12*100 Washer Expansion Screw Washers Stainless Steel Maintenance Wipes Hex Wrench P a g e | 55 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 56 Saturn-S1000 Series User Manual  Saturn-S1200: Saturn-S1200 Power Cable Card Expansion Screw M12*100 Washer Expansion Screw Washers Stainless Steel Maintenance Wipes Hex Wrench P a g e | 56 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

  • Page 57: Revision History

    Saturn-S1000 Series User Manual Revision History Revision Date Author Reviewer Description V1.0 12/11/2024 Julia Huang Original Document P a g e | 57 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.
  • Page 58 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2024 ZKTECO CO., LTD. All Rights Reserved. P a g e | 58 Copyright©2024 ZKTECO CO., LTD. All Rights Reserved.

This manual is also suitable for:

Saturn-s1000Saturn-s1200

Table of Contents