SPH Engineering SkyHub User Manual page 3

Revision Date
7 20.05.2022
6 09.02.2022
Copyright © 2019—2025, SPH Engineering
Description
• Added the Target Altitude limit of TTF and Grasshopper
modes above water for laser altimeter
• Added the Warnings section
• Added the RadSys zGPR description
• Added new parameters to Geonics EM-61 settings
• Updated the Update Firmware section
• Updated parameters in the NAV config section
• Changed the OUTPUT_GPS/FREQUENCY_HZ default value
from 1 Hz to 5 Hz
• Removed the START_DELAY_S parameter from payloads
configuration connected via UART/RS-232
• Added UgCS SkyHub 3
• Added the Supported Sensors section
• Added the Lightware SF30/D altimeter description
• Changed the Description section
• Removed the Attollo WASP-200 altimeter description
• Removed the Lightware SF11/C altimeter description
• Removed the UgCS SkyHub Device section
• Removed the Kits section
3
SkyHub User Manual
Revision 14 • December 2024