Table of Contents
Advertisement
NOTE
meets the following specifications.
T
In North America, the cable should be rated for 120 V, 7 A. The
plug is a NEMA 5-15P. Use an SVT or SJT 18/3 AWG cable that
is less than 15 feet (4.5 m) long. Use connector type IEC320.
T
In Europe, the cable should be rated for 230 V (220-240 V), 10 A.
The plug is country-specific. Use an H05VV-F or H05VVH2-F
cable that is less than 15 feet (4.5 m) long. The connector type is
EN60320.
Connect the power cable as follows.
1.
Position the MiniDock on a flat surface close to an AC outlet.
2.
Attach one end of the cable to the AC power port on the MiniDock.
3.
Attach the other end to a properly grounded wall outlet.
2-2 Docking and Undocking
If you need to replace the MiniDock power cable, make sure it
Connecting the power cable
Advertisement
Table of Contents
