Removing A Device From The Versabay Ii - NEC VERSA MINIDOCK 6000 Manual

While pressing the VersaBay Eject button, align the device with the
3.
VersaBay slot.
Slide the device into the VersaBay.
4.
Power on the MiniDock and the NEC Versa or take it out of Suspend
5.
mode.

Removing a Device from the VersaBay II

Remove a device installed in the VersaBay II as follows:
Power off the NEC Versa and the NEC MiniDock 6000 or put the
1.
MiniDock into Suspend mode.
Press the VersaBay II Eject button. The device in the bay pops out
2.
slightly.
Aligning the device
Adding Options and Connecting Peripherals 4-3