Using The Minidock Versabay Ii; Installing A Device In The Versabay Ii - NEC VERSA MINIDOCK 6000 Manual

USING THE MiniDock VersaBay II

You can use the MiniDock VersaBay II to install your diskette drive,
SuperDisk drive, CD-ROM reader, or second hard disk drive. Installing a
device in the MiniDock VersaBay II lets you use the VersaBay in your
computer for another device. Using the MiniDock VersaBay II gives you
access to more devices at one time.
NOTE
Versa. Do not install a diskette drive or SuperDisk drive in the Mini-
Dock if you already have a diskette or SuperDisk drive installed in
the notebook computer or attached via an External FDD connector.
The MiniDock VersaBay II does not support battery installation or
charging. Do not install the battery in the MiniDock VersaBay II.

Installing a Device in the VersaBay II

Install a device in the MiniDock VersaBay II as follows.
Powers the MiniDock on or off. (Press the Main Power button on the
1.
back of the MiniDock away from the vertical line to power off the unit.)
Locate the VersaBay II and its Eject button.
2.
4-2 Adding Options and Connecting Peripherals
You can access only one diskette drive attached to the NEC
Locating the VersaBay II slot and eject button