Using The Setup Utility - NEC VERSA MINIDOCK 6000 Service Manual

Using the Setup Utility

The setup utility installs the online MiniDock user's guide and the appropri-
ate PC card drivers for the operating system. Do so as follows:
Make sure the CD-ROM reader is installed in the NEC Versa and that the
1.
NEC Versa is not docked.
Power up the NEC Versa.
2.
Insert the NEC MiniDock Setup Utility CD into the reader and close the
3.
tray.
Proceed as follows:
4.
T
If your system is set to AutoPlay, the setup interface screen appears.
Go to the next step.
T
If your system is not set to AutoPlay or does not have AutoPlay
T
In the Run field, type
designation) and press
When a MiniDock software setup screen (similar to the one shown next)
5.
appears, proceed as follows.
NOTE: If your system requires the CardWizard
drivers, you must install them before docking
for the first time. Failure to install the drivers
first can result in a system malfunction.
in Windows for Workgroups, select Run from the File menu in
Program Manager.
in Windows 95 or Windows NT, select Run from the Start menu.
d:\install.exe
Setup and Operation
(where
d
or select OK.
Enter
is your CD-ROM reader
2-11