Undocking The Nec Versa; Undocking And Suspend/Resume Buttons - NEC VERSA MINIDOCK 6000 Service Manual

Hide thumbs Also See for VERSA MINIDOCK 6000:
Table of Contents

Advertisement

Undocking the NEC Versa

Undock your NEC Versa as follows.
Check the status of your NEC Versa power:
1.
T
If you are running Windows 95, you leave the system in Operation
mode to undock.
T
If you are running Windows for Workgroups or Windows NT, save
your files, close any open applications, exit Windows and press the
Power button on the side of the MiniDock to power off the system.
For easier undocking, close the LCD panel. (This is not required, but is
2.
recommended.)
Figure 2-11 Undocking and Suspend/Resume Buttons
Press the Undocking button on the side of the MiniDock. The Docking
3.
Status LED blinks green. When the LED turns a steady amber, you are
ready to undock.
NOTE: Wait until the LED turns amber before
disconnecting the NEC Versa. You cannot un-
dock the computer while the LED is green.
Setup and Operation
2-9

Advertisement

Table of Contents
loading

Table of Contents