Nec Versa Expansion Port Cover; Stowing The Expansion Port Cover - NEC VERSA MINIDOCK 6000 Service Manual

2-4 Setup and Operation
If you are running the NEC Versa on AC power, disconnect the AC
2.
adapter cable from the NEC Versa.
On the back of the NEC Versa, open the expansion port cover and slide it
3.
underneath the expansion port.
Check that all other NEC Versa port covers are closed.
Figure 2-3 NEC Versa Expansion Port Cover
Figure 2-4 Stowing the Expansion Port Cover
Verify that the power cord is plugged into the MiniDock and that
4.
MiniDock power is turned on. (See "Connecting the Power Cable" for
details.)
When the Docking Status LED lights steady amber, power to the Mini-
Dock is turned on and it is ready for docking.
NOTE: Before disconnecting power,
save any open files or close open appli-
cations to avoid data loss.