Replacing The Battery Pack - NEC VERSA 6050MH Service Manual

2-8 Setup and Operation
There is a danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.
T
Keep the battery away from heat sources including direct sunlight, open
fires, microwave ovens, and high-voltage containers. Temperatures over
60ºC (140ºF) may cause damage.
T
Do not drop or impact the battery.
T
Do not disassemble the battery.
T
Do not solder the battery.
T
Do not puncture the battery.
T
Do not use a battery that appears damaged or deformed, has any rust
on its casing, is discolored, overheats, or emits a foul odor.
T
Keep the battery dry and away from water.
T
Keep metal objects away from battery terminals. Metal objects in contact
with the terminals can cause a short circuit and damage.
T
If the battery leaks onto skin or clothing, wash the area immediately.
Battery fluid can cause a skin rash and damage fabric.
T
If battery fluid gets in eyes, DO NOT rub; rinse with clear water imme-
diately and see a doctor.
T
Make sure the battery is properly installed in the battery bay.

Replacing the Battery Pack

Replace the battery pack installed in your NEC Versa system as follows.
Save your files, exit Windows, and press the Suspend button or turn off system
1.
power.
2. Close the LCD and turn the system over.
NOTE: Use Li-Ion batteries in the NEC Versa
computer for which they are designed. Also, in-
stalling another manufacturer's battery, or using
a combination of very old and new batteries can
deteriorate battery and equipment performance.
!
WARNING