Adding Memory Modules - NEC READY ES PRO Manual

Adding memory modules

Use the following steps to install memory modules.
1.
Be sure that the system unit power is turned off and the
system is unplugged before you begin the installation
procedure.
2.
Before you install a memory module, reduce static
discharge by touching the system's metal chassis.
3.
Remove the system unit cover (see "Taking off the cover").
!
Locate the memory upgrade sockets for your configuration
(see "Checking the memory in your system").
If you need to remove a memory module, see "Removing a
memory module" in this guide.
!
Insert the memory module as follows:
T
Press out the plastic locking clips at the ends of an empty
socket.
T
Align the notches on the module with the keys in the
memory socket.
T
Insert the module into the socket.
T
Press in the plastic locking clips at the ends of the socket
until they lock in place on the module.
WARNING
CAUTION
System memory 19