Graphics Accelerator - NEC READY ES PRO Manual

Only shielded USB cables meeting the requirements for
fast-speed USB devices should be used. Unshielded
cables can generate harmful interference to radio and
television reception, even if no device is connected to the
cable.
The board supports the universal host controller interface and uses
software drivers that are controller compatible. Features include:
T
T
T
T
T

Graphics accelerator

All modem configured systems come with an ATI Rage™ II graphics
accelerator chip integrated on the system board. The chip integrates
3D/2D graphics accelerators, pallet DAC, dual-clock synthesizers,
and 2 MB of video SGRAM memory.
With 2 MB of video memory, the system supports the following
resolutions and colors:
T
T
T
90 System specifications
!
hot plugging of USB devices while the system is running
support for up to 127 USB devices
variable speeds between 1.5 Mbps (mice, keyboard) and
12 Mbps (printers)
automatic mapping of function to driver and configuration
built-in error handling and fault-recovery mechanisms.
1024 by 768 pixels, 256/64K colors
800 by 600 pixels, 256/64K/16.8 million colors
640 by 480 pixels, 16/256/64K/16.8 million colors.
CAUTION