Hard Disk - NEC READY ES PRO Manual

FEATURE
Data Transfer Rate
Disk Speed
Number of Tracks
Maximum bit density
Seek time
Head setting time
Tracks per inch
Recording mode
General Specifications
Temperature
Relative Humidity
Dimensions (W x H x D)
Weight

Hard disk

The standard 3.2-GB, 4.3-GB, or 6.4-GB hard disk drive is mounted
in the 3 1/2-inch internal device slot in the system unit. The hard disk
is connected to the primary IDE port on the system board as the
master device.
The drive is auto-configurable, meaning that once the master/slave
jumpers are set, the hard disk type is automatically detected by the
system and remaining drive parameters are automatically set by the
system's Setup utility.
Diskette drive specifications
SPECIFICATION
High density mode:
500/250 Kbit/sec
Normal density mode:
250/125 Kbit/sec
300 rpm
160 (80 tracks x 2 sides)
High density mode:
17434/8717 BPI
Normal density mode:
8717/4359 BPI
3 ms
15 ms
135 TPI
MFM/FM
Operating: 4 C to 46 C
20% to 80%
25.4 mm x 101.6 mm x 146 mm
430 grams (typical)
System specifications 93