Table of Contents
Advertisement
Working inside the system
Take care when you work inside the system. Avoid electric shock or
personal injury by observing the following warning.
Before you remove the system cover and work inside the
unit, turn off all system power and disconnect the system
and its peripherals from their power sources.
Handling computer parts
Static electricity and improper installation procedures can damage
your computer components. Protect your computer components by
following these safety instructions:
T
T
T
4 Precautions
!
Leave an upgrade option, such as a board or chip, in its anti-
static packaging until you are ready to install it.
Dissipate static electricity before handling any system
components (boards, chips, and so on) by touching a
grounded metal object, such as the system's unpainted metal
chassis.
If possible, use anti-static devices, such as wrist straps and
floor mats.
Always hold a chip or board by its edges. Avoid touching the
components on the chip or board.
WARNING
Hide quick links:
Advertisement
Table of Contents
