Interface, Rotate And Press The Select Dial To - Godox KNOWLED MS60Bi Instruction Manual

CRMX BT to CRMX
1. First, connect the Android/iOS tablet to Godox TimoLink TRX via the BT module.
2. Then connect Godox TimoLink TRX to CRMX fixtures, or DMX fixtures (used with Godox
TimoLink RX).
3. Finally, add the fixtures in "Godox KNOWLED" app to control them.
Android/iOS tablet
"Godox KNOWLED" App
Note: TimoLink TRX and TimoLink RX are sold separately.
3. Bluetooth
Short press the select dial to enter Bluetooth

interface, rotate and press the select dial to

Bluetooth to turn it on or off. If you need to
reset the Bluetooth, rotate the select dial to
reset and press it to choose between yes
and no. The MAC code is on the left corner
for quick check.
"GODOX Light" app Downloading
Scan the QR code to download the "Godox Light"
smartphone app (can be used in Android and iOS).
Note:
1. The app can be used directly on the firstly installed device
(smartphone or tablet). When change to other mobile device
(smartphone or tablet), the light shall be reset before the
normal connection of the app.
2. The app should be version 3.0 or above.
Godox TimoLink TRX
CRMX BT
CRMX
CRMX
Bluetooth
Bluetooth
Reset
MAC:E900
61
Fixture with CRMX
Fixture without CRMX
need to be used with
Godox TimoLink RX
60
Off