Gibus MOVIE ISLAND VERSION Use And Maintenance Manual page 36

The Bioclimatic Pergola is recommended to be exposed to a maximum wind load equal to 170
Newton/m 2 corresponding to a continuous wind at a maximum speed of 60 Km/h according to
the Beaufort scale. For safety reasons, it is advisable to partially open the blades before this limit
is reached. If no sensor is installed, manually direct the blades if there is a strong wind.
ATTENTION: never perform repeated opening and closing operations with the engine,
this could cause the motor to overheat, which could block it, and make it impossible
to perform the necessary movements (in the case of strong wind or snow).
If the bioclimatic pergola's blades were closed and ice or snow have deposited on them, do
not move the blades until all the snow has been removed or the ice has melted. Otherwise, the
movements could be blocked and the components damaged.
IMPORTANT! The operation with ice may damage the Bioclimatic Pergola! Do not
operate the Bioclimatic Pergola before having first removed the snow and the ice
formed.
IMPORTANT!: in the case of failures, turn to you dealer and if required only ask for
Gibus original spare parts.
ATTENTION! In the case of fault or when searching for faults, respect the safety
measures. In particular when searching for or repairing any faults to the electric
components, there is the risk or fatal electric shock. only qualified electricians
must carry out the maintenance to the electrical parts.
36 56
Page of
USE AND MAINTENANCE MANUAL
Code 340490
Rev. 1
www.gibus.com