Default Mode Settings - NEC N400i User Manual

You can also set the Meeting mode by pressing and holding the ▲ key on the standby screen.

Default Mode settings

When a mode is selected, some of your phone's settings are altered automatically to the respective mode.
The following table shows the default settings for each mode.
Normal mode
Ringer Default melody
Ringer volume
Msg tone Default melody
Msg tone volume
Key tone
Service tone
Vibrator
Auto answer
If the selected mode is Car, the backlight will always be turned on. This will reduce battery life.
The default settings shown above may vary. Be sure to check the setting data with your phone.
Editing the Mode settings
☛
With the standby screen displayed, press the ▲ key.
☛
Use the ▲ and ▼ keys to highlight the required mode and press Softkey 1 to display a phone mode edit screen before performing the following
procedures.
You can also access the Phone modes screen by pressing
Ringer
☛
With a phone mode edit screen displayed, press 1 to display the list screen that includes the currently set melody.
☛
Use the ▲ and ▼ keys to highlight the desired ringer, and then press
See also: "Sounds" on page 69.
Ringer volume
☛
With a phone mode edit screen displayed, press 2 to display the Ringer volume screen with a volume slider.
Meeting mode
Default melody
Medium Quiet
Default melody
Medium Quiet
On Off
On Off
On On
Always Off Always Off
Pocket mode Car mode
Default melody Default melody
Loud Medium
Default melody Default melody
Loud Medium
On
On
On
Always Off
1 and 2 from the standby screen.
.
On
On
Off
On
22