PureTools PT-SP-HD18-48G User Manual page 4

User Manual
PT-SP-HD18-48G
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully
before using the device. Save this manual for further reference.
⚫
Unpack the equipment carefully and save the original box and packing
material for possible future shipment.
⚫
Follow basic safety precautions to reduce the risk of fire, electrical shock
and injury to persons.
⚫
Do not dismantle the housing or modify the module. It may result in
electrical shock or burn.
⚫
Using supplies or parts not meeting the products' specifications may
cause damage, deterioration or malfunction.
⚫
Refer all servicing to qualified service personnel.
⚫
To prevent fire or shock hazard, do not expose the unit to rain, moisture
or install this product near water.
⚫
Do not put any heavy items on the extension cable in case of extrusion.
⚫
Do not remove the housing of the device as opening or removing
housing may expose you to dangerous voltage or other hazards.
⚫
Install the device in a place with fine ventilation to avoid damage caused
by overheat.
⚫
Keep the module away from liquids.
⚫
Spillage into the housing may result in fire, electrical shock, or
equipment damage. If an object or liquid falls or spills on to the housing,
unplug the module immediately.
⚫
Do not twist or pull by force ends of the optical cable. It can cause
malfunction.
⚫
Do not use liquid or aerosol cleaners to clean this unit. Always unplug
the power to the device before cleaning.
⚫
Unplug the power cord when left unused for a long period of time.
⚫
Information on disposal for scrapped devices: do not burn or mix with
general household waste, please treat them as normal electrical wastes.