NEC ELECTRA ELITE Manual page 9

C
o n f e r e n c e B r i d g e
Call a Conference Bridge extension.
When the voice prompt is heard, enter the password and press # .
Start the conference call.
Start a conference call from an an off premise location:
Call a line that is directed to the Conference Bridge.
When the voice prompt is heard, enter the password and press # .
Start the conference call.
Start a conference call from an incoming CO call using an Automated Attendant:
Call an outside line that is answered by an Automated Attendant.
Dial the extension of the Conference Bridge.
When the voice prompt is heard, enter the password and press # .
Start the conference call.
Start a conference call from an incoming CO call using an Attendant:
Call the attendant, and ask to be transferred to a Conference Bridge extension.
Wait until the transfer is complete.
When the voice prompt is heard, enter the password and press # .
Start the conference call.
NOTE: Default passwords: Conference #1= 0001. Conference #2= 0002.
C
a l l P a r k - S y s t e m
SET
With a call in progress:
Press Transfer.
Dial Call Park Set code 4 *.
Dial Call Park location 0~9.
Replace handset.
NOTE: If the dialed Call Park location is busy, dial another Call Park location (0~9).
S
t a t i o n B u s y / N o A n s w e r O p t i o n s
A
U T O M A T I C
SET
When calling a busy multiline telephone:
Dial Automatic Callback code 0.
Replace handset.
C
A L L B A C K
RETRIEVE
From any station:
Lift handset.
Dial Call Park Retrieval code 4 # .
Dial Call Park location 0~9.
Converse.
ANSWER
When both telephones are idle
originating telephone rings:
Lift handset.
Call is placed automatically.
7