NOTICE:
You cannot remove devices or undock your Tablet-PC while your
Tablet-PC is in hibernate mode.
Your Tablet-PC enters hibernate mode if the battery charge level becomes
critically low.
To Manually Enter Hibernate Mode in Windows Vista
Click Start
, and move your mouse over the right triangle beside the Lock
icon to open the Power Options Properties window, and then click
Hibernate.
NOTE:
In Windows Vista, if your Tablet-PC has Hybrid Sleep enabled, then
Hibernate is not displayed.
To Manually Enter Hibernate Mode in Windows XP
To manually enter hibernate mode in Windows XP , you must enable
hibernate mode.
To enable hibernate mode:
1 Click Start→ Control Panel→ Performance and Maintenance→ Power
Options.
2 Click the Hibernate tab.
3 Select Enable hibernation.
4 Click Apply and Ok.
To enter hibernate mode:
1 Press the <Ctrl><Alt><Del> key combination.
2 Select Shut Down→ Hibernate.
Alternative Methods for Entering Hibernate Mode
Depending on how your power management options are set, you can also use
one of the following methods to enter hibernate mode:
•
Press the power button
•
Close the display
•
Press <Fn><Esc>
78
Setting Up and Using Your Tablet-PC