grounding strap or by periodically touching a connector on the back panel of the
before you begin working inside the Tablet-PC.
Removing the Coin-cell Battery
1 Follow the procedures in "Before You Begin" on page 155.
2 Remove the hinge cover (see "Removing the Hinge Cover" on page 174).
3 Remove the keyboard (see "Removing the Keyboard" on page 176).
4 Remove the coin-cell battery connector from the connector on the system
5 Using your fingers, pry the coin-cell battery from the system base.
coin-cell battery connector
Installing the Coin-Cell Battery
1 Place the battery into position, pressing firmly to affix the battery to the
sticky tape on the base.
Adding and Replacing Parts
To avoid electrostatic discharge, ground yourself by using a wrist
To avoid damaging the system board, you must remove the main battery