Infineon KIT XMC PLT2GO XMC4200 Manual

Hide thumbs Also See for KIT XMC PLT2GO XMC4200:

Manual (35 pages)

Table Of Contents

Quick Links

Download this manual

KIT_XMC_PLT2GO_XMC4200 Evaluation board guide

About this document

Scope and purpose

This document explains about the KIT_XMC_PLT2GO_XMC4200 Evaluation board: kit operation, out-of-the-box

example and its operation, and the hardware details of the board.

Intended audience

This document is intended for all embedded developers using the KIT_XMC_PLT2GO_XMC4200 Evaluation

board.

Evaluation board

This board is to be used during the design-in process for evaluating and measuring characteristic curves, and

for checking datasheet specifications.

Note:

PCB and auxiliary circuits are NOT optimized for final customer design.

User guide

Please read the sections "Important notice" and "Warnings" at the end of this document

Rev. 1.1

www.infineon.com

2025-01-23

Table of Contents

Need help?

Do you have a question about the KIT XMC PLT2GO XMC4200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Infineon KIT XMC PLT2GO XMC4200

Page 1: About This Document
This board is to be used during the design-in process for evaluating and measuring characteristic curves, and for checking datasheet specifications. Note: PCB and auxiliary circuits are NOT optimized for final customer design. User guide Please read the sections "Important notice" and "Warnings" at the end of this document Rev. 1.1 www.infineon.com 2025-01-23...
Page 2: Important Notice
Boards provided by Infineon Technologies. The design of the Evaluation Boards and Reference Boards has been tested by Infineon Technologies only as described in this document. The design is not qualified in terms of safety requirements, manufacturing and operation over the entire operating temperature range or lifetime.
Page 3: Safety Precautions
KIT_XMC_PLT2GO_XMC4200 Evaluation board guide Safety precautions Safety precautions Note: Please note the following warnings regarding the hazards associated with development systems. Table 1 Safety precautions Warning: The DC link potential of this board is up to 1000 V or more. When measuring voltage waveforms by oscilloscope, high voltage differential probes must be used.
Page 4: Table Of Contents
KIT_XMC_PLT2GO_XMC4200 Evaluation board guide Table of contents Table of contents About this document ..............1 Important notice .
Page 5: Introduction
Microcontroller from Infineon Technologies AG. ™ It can be used with a wide range of development tools including Infineon’s free of charge Eclipse based IDE DAVE. The XMC4200 Platform2Go Series-V1.1 are designed to evaluate the capabilities of the XMC4200 Microcontroller.
Page 6: Key Features
KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 1 Introduction The Ethernet-communication is not supported by the XMC4200 Platform2Go Lite Kit, because some components e.g. for Ethernet are not assembled. All boards are marked with “Platform2Go XMC4200-V1.1” and can be distinguished by the assembled devices (see pictures in Chapter 2).
Page 7: Block Diagram
Two 40-pin header X1 and X2 • Connection Header for Arduino • MikroBUS connector ™ • Two Infineon Shield2Go connectors (at the bottom of the board) • Potentiometer (10kOhm) • On-board power generation • User Push-Button, User LED, Reset Push-Button •...
Page 8: Hardware Description
KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 2 Hardware Description Hardware Description The following chapters give a detailed description of the board hardware and how it can be used. The different assembly versions of the kits series are shown in Figure Figure Figure 4 Figure Figure 2 XMC4200 Platform2Go 3.3V...
Page 9 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 2 Hardware Description Figure 3 XMC4200 Platform2Go 5V User guide Rev. 1.1 2025-01-23...
Page 10 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 2 Hardware Description Figure 4 XMC4200 Platform2Go 3.3V Lite User guide Rev. 1.1 2025-01-23...
Page 11 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 2 Hardware Description Figure 5 XMC4200 Platform2Go 5V Lite User guide Rev. 1.1 2025-01-23...
Page 12: Power Supply
KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 2 Hardware Description Power Supply The XMC4200 Platform2Go Series-V1.1 must be supplied by an external 5 Volt DC power supply connected to any of the micro USB plugs (X100, X101). The green Power LED (VDD3.3) indicates the presence of the generated 3.3 V supply voltage.
Page 13: Pin Header X1 And X2
KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 2 Hardware Description Pin Header X1 and X2 The pin headers X1 and X2 can be used to extend the evaluation board or to perform measurements on the XMC4200. Figure 7 shows the available GPIOs/signals at these pin headers. The pin table is also printed onto the bottom side of the PCB in bottom view.
Page 14: Pin Header For Microbus And Shield2Go Connector 1 And 2
KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 2 Hardware Description Pin Header for Microbus and Shield2Go Connector 1 and 2 The pin header for Microbus and Shield2Go Connector 1 and 2 can be used to extend the evaluation board or to perform measurements on the XMC4200. Figure 8 shows the available signals at these pin headers.
Page 15: Solderable 0 Ohm Pin Bridges
KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 2 Hardware Description Solderable 0 Ohm Pin Bridges The 0 Ohm (0805) pin bridges enable/disable the signal pins in Table 4 (enabled by default). To disable the signals, their resistor has to be removed. The XMC4200 pins are then usable for other usages. Table 4 Signal mapping of the 0 Ohm Pin Bridges Resistor...
Page 16: User Push Buttons, Potentiometer And User Leds
™ ™ development platform for the XMC microcontroller families to simplify and shorten SW development. It can be downloaded at www.infineon.com/dave. The latest Segger J-Link Driver can be downloaded at http:// www.segger.com/jlink-software.html. Table 7 shows the pin assignment of the XMC4200 used for debugging and UART communication.
Page 17: Uart Communication For Xmc4200
KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 2 Hardware Description UART Communication for XMC4200 Table 7 XMC4200 Pins Mapping for Debugging and UART-Communication Pin Function Input/Output XMC Pin Data pin for Debugging via SWD Clock pin for Debugging via SWD Transmit pin for UART communication (PC_RX) XMC4200 Debugger P1.5 (TXD_U0C0.DOUT0) Receive pin for UART communication (PC_TX)
Page 18: Can Transceiver
The XMC4200 Platform2Go provides a CAN interface via X3, a D-Sub DE-9, and the X1 and X2 connector. Infineon’s high speed CAN transceiver (IFX1051LE) for industrial applications supports 3.3V I/O logic and is suitable for 12 V and 24 V bus systems with an excellent EMC performance. The CAN bus (signals CANH, CANL) are terminated by a 120 Ohm resistor and can provide 5V if R_opt is assembled with a 0 Ohm 0805 resistor (not assembled by default).
Page 19: Production Data
KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 3 Production Data Production Data This chapter covers schematics, board dimensions, component placement and the list of material. Schematics In the following figures shows the schematics of the XMC4200 Platform2Go Series-V1.1 in. User guide Rev. 1.1 2025-01-23...
Page 20 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 3 Production Data C301 100nF C303 100nF C302 100nF C300 100nF Figure 10 Connectors Schematic: Pin header, Pin Bridges, Level Shifter, Microbus, Shield2Go Connector, Arduino Level Jumper User guide Rev. 1.1 2025-01-23...
Page 21 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 3 Production Data C130 100nF C129 100nF C128 100nF C127 10uF C126 10uF 4.7uF C125 C124 100nF C123 100nF 5 TH-Pads 2.54mm pitch Figure 11 XMC_4200_Debug Schematic: OBD Probe User guide Rev. 1.1 2025-01-23...
Page 22 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 3 Production Data Figure 12 XMC4200 Schematic: USB connector, Microcontroller pins and power, Potentiometer Button and LED User guide Rev. 1.1 2025-01-23...
Page 23 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 3 Production Data C133 10uF C132 10uF Figure 13 ICs and Power Schematic: Can Transceiver, RTC Battery, Power User guide Rev. 1.1 2025-01-23...
Page 24 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 3 Production Data Figure 14 Geometry User guide Rev. 1.1 2025-01-23...
Page 25: List Of Material
KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 3 Production Data List of Material Table 11 List of Material Description Designator Package Value Quantity Not fitted in Reference Micro Miniature BUTTON1 P1.15, FSM2JSMA Pushbutton RESET Switch Solid Tantalum CAPMP7343X310 220uF Surface Mount Chip Capacitor Surface Mount C100, C109,...
Page 26 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 3 Production Data Table 11 (continued) List of Material Description Designator Package Value Quantity Not fitted in Reference Chip Monolithic C125 CAPC2013X95N 4.7uF Ceramic Capacitor Surface Mount COM, DEBUG, 0603/1608 Green LED, Green, VDD3.3 570nm High-Speed SOT23...
Page 27 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 3 Production Data Table 11 (continued) List of Material Description Designator Package Value Quantity Not fitted in Reference For Power Lines; L100, L102, L103 SMD Chip For General LED1 P0.1 0603/1608 mikroBUS Host MIKROBUS Two times 1x8 ...
Page 28 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 3 Production Data Table 11 (continued) List of Material Description Designator Package Value Quantity Not fitted in Reference Standard Thick R111, R118, 0402/1005 510R Film Chip R122 Resistor Standard Thick R112, R130 0603/1608 680R Film Chip Resistor Standard Thick...
Page 29 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 3 Production Data Table 11 (continued) List of Material Description Designator Package Value Quantity Not fitted in Reference Micro-USB 2.0 X100, X101 ZX62-AB-5PA(31) 2 Standard, Type AB, Bottom Mount, Shell SMT THT Micro X102 ...
Page 30 KIT_XMC_PLT2GO_XMC4200 Evaluation board guide 3 Production Data Table 11 (continued) List of Material Description Designator Package Value Quantity Not fitted in Reference Through hole X304 TSW-110-07-L-S .025'' SQ Post Header, 2.54mm pitch, 10 pin, vertical, single Agenda: A: XMC4200 Platform2Go for 3.3V Shields B: XMC4200 Platform2Go for 5V Shields C: XMC4200 Platform2Go Lite for 3.3V Shields D: XMC4200 Platform2Go Lite for 5V Shields...
Page 31: Revision History
KIT_XMC_PLT2GO_XMC4200 Evaluation board guide Revision history Revision history Document Date Description of changes revision 2019-08-30 Initial version 2025-01-23 Template update; no content update User guide Rev. 1.1 2025-01-23...
Page 32: Disclaimer
Infineon Technologies, Email: erratum@infineon.com Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be Document reference expected to result in personal injury.