Snmp-Server Enable Port-Traps Atc Multicast-Control-Apply; Snmp-Server Enable Port-Traps Atc Broadcast-Control-Release - SMC Networks 6152PL2 Management Manual

snmp-server enable port-traps atc multicast-control-apply

This command sends a trap when multicast traffic exceeds the upper threshold for
automatic storm control and the apply timer expires. Use the no form to disable this
trap.
Syntax
[no] snmp-server enable port-traps atc multicast-control-apply
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc
multicast-control-apply
Console(config-if)#
Related Commands
auto-traffic-control alarm-fire-threshold (4-239)
auto-traffic-control apply-timer (4-237)

snmp-server enable port-traps atc broadcast-control-release

This command sends a trap when broadcast traffic falls beneath the lower threshold
after a storm control response has been triggered and the release timer expires. Use
the no form to disable this trap.
Syntax
[no] snmp-server enable port-traps atc broadcast-control-release
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc
broadcast-control-release
Console(config-if)#
Automatic Traffic Control Commands
4
4-245