Table of Contents
Advertisement
4
Command Line Interface
- Max Count
- Port-control
- Supplicant
- Current Identifier
- Intrusion action
• Authenticator State Machine
- State
- Reauth Count
• Backend State Machine
- State
- Request Count
- Identifier(Server) – Identifier carried in the most recent EAP Success,
• Reauthentication State Machine
- State
4-154
– The maximum number of hosts allowed to
access this port (page 4-148).
– Shows the dot1x mode on a port as auto,
force-authorized, or force-unauthorized
(page 4-147).
– MAC address of authorized client.
– The integer (0-255) used by the Authenticator to
identify the current authentication session.
– Shows whether the switch will block all non-EAP
traffic or assign traffic on the port to a guest
VLAN if authentication fails.
– Current state (including initialize, disconnected,
connecting, authenticating, authenticated, aborting,
held, force_authorized, force_unauthorized).
– Number of times connecting state is re-entered.
– Current state (including request, response,
success, fail, timeout, idle, initialize).
– Number of EAP Request packets sent to the
Supplicant without receiving a response.
Failure or Request packet received from the
Authentication Server.
– Current state (including initialize, reauthenticate).
Advertisement
Table of Contents
