Configure; Show History - SMC Networks 6128PL2 - annexe 2 Management Manual

Example
Console#disable
Console>
Related Commands
enable (4-20)

configure

This command activates Global Configuration mode. You must enter this mode to
modify any settings on the switch. You must also enter Global Configuration mode
prior to enabling some of the other configuration modes, including Interface
Configuration, Line Configuration, and VLAN Database Configuration. See
"Understanding Command Modes" on page 4-5.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#configure
Console(config)#
Related Commands
end (4-24)

show history

This command shows the contents of the command history buffer.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The history buffer size is fixed at 10 Execution commands and
10 Configuration commands.
General Commands
4
4-21