Replacing The 14.1-Inch Display Panel - Dell LATITUDE Latitude C600 Service Manual

Remove the M2 x 4-mm screw that secures the display-feed flex cable
6
to the display assembly through the black plastic flex cable retention
bracket (see "14.1-Inch Display Assembly Bezel and Panel").
Disconnect the bottom flex cable connector from the display-assembly
7
top cover and inverter connector by pulling straight up on the attached
pull tab.
Lift and rotate the top of the display panel out of the display-assembly
8
top cover.

Replacing the 14.1-Inch Display Panel

Place the bottom edge of the display panel in the bottom of the
1
display-assembly top cover and elevate the top of the panel with your
hand.
Place the display panel in the display-assembly top cover.
2
Reinstall the five M2 x 4-mm screws that secure the display panel to
3
the display-assembly top cover.
Re m o v i n g a nd Rep l a ci n g Part s
31