Removing The System Board - Dell LATITUDE Latitude C600 Service Manual

54 Re m o vi n g a n d Re p l a c i n g Par ts
R e m o v i n g t h e S y s t e m B o a r d A s s e m b l y S c r e w s
fan guard

Removing the System Board

NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by periodically touching an unpainted metal on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing
the following procedure.
Remove the hard drive.
1
Remove the keyboard assembly.
2
Remove the display assembly.
3
Remove the palmrest assembly.
4
Remove the thermal cooling assembly.
5
Remove the microprocessor.
6
Verify that all PC Cards or plastic blanks are removed from the PC
7
Card slot.
M2.5 x 5-mm
screws (9)