Keyboard Assembly; Removing The Keyboard Assembly - Dell LATITUDE Latitude C600 Service Manual

Keyboard Assembly

R e m o v i n g t h e K e y b o a r d S c r e w s
M2.5 x 12-mm screws (5)

Removing the Keyboard Assembly

NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing
the following procedure.
Remove the hard drive.
1
Turn the computer over, and remove the five M2.5 x 12-mm screws
2
from the holes labeled "circle K."
Turn the computer over and open the display.
3
NOTICE: The key caps on the keyboard are fragile, easily dislodged, and
time-consuming to replace. Be careful when removing and handling the
keyboard.
Re m o v i n g a nd Rep l a ci n g Part s
23