R o u t i n g t h e L e f t S p e a k e r C a b l e
Removing the Speaker Assemblies
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by touching an unpainted metal
surface or by using a wrist grounding strap.
NOTICE: Read "Preparing to Work Inside the Computer" before performing
the following procedure.
NOTICE: Make note of the speaker and antenna wire routing so you can
replace them properly under their routing clips.
Re m o v i n g a nd Rep l a ci n g Part s
51