Spectra LL1505C Manual page 7

RC1402 Remote Control
The RC1402 is backwards compatible with the product LL300S.
©2025 Spectra Precision | All Rights Reserved
Powering the RC1402
1. Open the battery door using a coin or similar pry device
to release the battery door tab on the RC1402N.
2. Insert two AA batteries noting the plus (+) and minus (-)
diagrams inside the battery housing.
3. Close the battery door. Push down until it „clicks" into
the locked position.
Turning On the RC1402
Press the Power button to turn on the radio remote control.
Using the RC1402, the LL1505C provides more features than
the laser only.
Turning Off the RC1402
Press and hold the Power button for two seconds.
©2024 Spectra Precision | All Rights Reserved