Mask mode
Mask mode allows you to electronically turn off the laser beam in up to three lighthouse
sections to prevent interference with other receivers or reflecting surfaces on the job site.
At the laser or remote control press up/down arrow button and within one second press
the manual button to mask the + or – Y axis.
At remote control press left/right arrow button and within one second press the manual
button to mask the + or – X axis.
The display on the RC1402 remote control indicates which section of the laser has been
turned off.
Note: The laser always powers on with the mask mode deactivated.
Up/down and left/right arrow buttons
Manual button
©2025 Spectra Precision | All Rights Reserved
©2024 Spectra Precision | All Rights Reserved
Need help?
Do you have a question about the LL1505C and is the answer not in the manual?