Advertisement
Turn on the laser LL1505C
To turn the laser on, press the power button for two seconds.
The laser always powers on in automatic self leveling mode.
All LEDs are turned on for two seconds.
On the RC1402 remote control:
The LCD may show „Initialisation" and for one second the software revision.
The LCD shows the mask mode and for a few seconds the battery status.
Power button
©2025 Spectra Precision | All Rights Reserved
©2024 Spectra Precision | All Rights Reserved
Advertisement
Need help?
Do you have a question about the LL1505C and is the answer not in the manual?