Advertisement
Standby mode
Standby mode helps to increase the battery life but still controls the laser set up during
breaks. The self-leveling and rotation will be stopped and the laser beam will be turned
off while the shock warning (HI-alert) is still active.
Press and hold the manual button at the laser or remote control for three seconds to
activate the standby mode.
The HI/MAN LED at the laser flashes red every five seconds while the display (on the
RC1402 remote control) shows „Standby".
Press and hold the manual button for three seconds to deactivate standby mode and
restore full operations of the laser.
HI/MAN LED
Manual button
©2025 Spectra Precision | All Rights Reserved
©2024 Spectra Precision | All Rights Reserved
Advertisement
Need help?
Do you have a question about the LL1505C and is the answer not in the manual?