Advertisement
Manual mode
Manual mode bypasses the laser's automatic leveling to use the laser in slope mode in
horizontal as well as in vertical set up.
Press and release the manual button at the laser or the remote control.
Result: the MAN LED will flash red once a second.
Horizontal: slope the laser beam using the arrow buttons at the laser or the remote
control.
Vertical: the up/down arrow buttons adjust the vertical slope. The left/right arrow buttons
can be used for the line adjustment to the left and right.
To resume the automatic self-leveling mode, press the manual button three times.
Up/down arrow buttons
MAN LED
Manual button
©2025 Spectra Precision | All Rights Reserved
©2024 Spectra Precision | All Rights Reserved
Advertisement
Need help?
Do you have a question about the LL1505C and is the answer not in the manual?