Hardware Reset; Other Adjustments; Important Reminders - PICO SkillsVR 4 ULTRA Setup Manual

STEP-BY-STEP GUIDE

Hardware Reset

» Reset the Headset: If the headset becomes unresponsive, press and hold the POWER button for 10
seconds to perform a reset.
» Reset the Controller: If the controller becomes unresponsive, remove and reinstall the batteries to
reset it.

Other Adjustments

Glasses Spacer:
» If wearing glasses, you may install the optional Glasses Spacer to provide extra space between
your glasses and the headset lenses. This will reduce pressure on the nose bridge and prevent your
glasses from touching the lenses.
Face Cushion Replacement:
Over time, the face cushion may become worn out or discolored. If needed, you can replace it with a
»
new one for a better fit and hygiene.

Important Reminders

Physical Safety: Always ensure you're in a safe and spacious environment when using the headset.
»
Avoid tripping hazards, and be aware of the physical boundaries of your play area.
» Take Breaks: Extended use may cause dizziness or eye fatigue. It's recommended to take a
30-minute break every hour. If you experience discomfort, stop using the headset immediately.
» Lens Care: Protect the headset lenses from scratches and clean them gently using a soft cloth.
Never use harsh chemicals or abrasive materials.
Vision and Health: The PICO 4 Ultra does not support vision correction. Wear your glasses if
»
needed, and consult a doctor if you experience discomfort such as dizziness, eye strain, or visual
abnormalities.
Sunlight Exposure: Do not expose the headset to direct sunlight or other strong light sources, as it
»
can cause permanent damage to the display.
Skills Support | PICO 4 ULTRA Setup Guide
VR
6