Error Messages - Dell Inspiron PP09L Owner's Manual

3
If you run a test from the Custom Test or Symptom Tree option, click the applicable tab
described in the following table for more information.
Tab
Results
Errors
Help
Configuration
Parameters
4
When the tests are complete, close the test screen to return to the Main Menu screen. To exit
the Dell Diagnostics and restart the computer, close the Main Menu screen.

Error Messages

If the message is not listed, see the documentation for the operating system or the program that
was running at the time the message appeared.
T H E F I L E B E I N G C O P I E D I S T O O L A R G E F O R T H E D E S T I N A T I O N D R I V E
file that you are trying to copy is too large to fit on the disk, or the disk is too full.
Try copying the file to a different disk or use a larger capacity disk.
A F I L E N A M E C A N N O T C O N T A I N A N Y O F T H E F O L L O W I N G C H A R A C T E R S
" < > | — Do not use these characters in filenames.
I N S E R T B O O T A B L E M E D I A
nonbootable floppy disk or CD. Insert a bootable floppy disk or CD.
Function
Displays the results of the test and any error conditions
encountered.
Displays error conditions encountered, error codes, and
the problem description.
Describes the test and may indicate requirements for
running the test.
Displays your hardware configuration for the selected
device.
The Dell Diagnostics obtains configuration information
for all devices from the system setup program, memory,
and various internal tests, and it displays the information
in the device list in the left pane of the screen. The
device list may not display the names of all the
components installed on your computer or all devices
attached to your computer.
Allows you to customize the test by changing the test
settings.
— The operating system is trying to boot to a
— The
: \ / : * ?
Solving Problems
77