MT-12TL
ROSE Bikes GmbH
Schersweide 4, 46395 Bocholt,
Germany. rosebikes.com
Made in Taiwan
DE // BEDIENUNGSANLEITUNG MINIWERKZEUG // BEST.-NR.: 2354113
GEFAHR
Unfall- und Beschädigungsgefahr durch falsche Anwendung des Multitools!
Falsche Anwendung der Werkzeuge des Multitools oder Verwendung der Werkzeuge für nicht passende
Komponenten kann zu Beschädigungen und plötzlichem Versagen von Teilen deines Fahrrads führen!
• Wartungsarbeiten am Fahrrad dürfen nur von Personen mit Erfahrung im Umgang mit
Fahrradkomponenten durchgeführt werden.
• Die Angaben der Komponentenhersteller müssen beachtet werden.
• Einige Schrauben an deinem Fahrrad müssen mit einem definierten Drehmoment angezogen
werden. Benutze dazu unbedingt einen geeigneten Drehmomentschlüssel!
• Im Zweifelsfall muss die Hilfe eines Zweiradmechatronikers in Anspruch genommen werden.
Allgemeines
Diese Bedienungsanleitung muss vor der ersten Verwendung deines Multitools gelesen und verstanden
worden sein. Bewahre diese Bedienungsanleitung für späteres Nachschlagen auf. Verkaufst oder verschenkst
du dein Multitool, muss diese Bedienungsanleitung dem Multitool beigelegt werden.
A
Funktionsübersicht
1
Reibahle 3,5 mm
2
Kreuzschlitz-Schraubendreher
3
3 mm Innensechskant
4
5 mm Innensechsrund
5
8 mm Innensechskant
6
6 mm Innensechskant
Wartung und Pflege
Regelmäßige Wartung und Pflege sorgen für eine lange und zuverlässige Haltbarkeit sowie eine
uneingeschränkte Funktion. ROSE Bikes empfiehlt folgende Tätigkeiten:
• Das Multitool sollte sorgsam behandelt und so aufbewahrt werden, dass Korrosion erschwert
wird und Beschädigungen ausgeschlossen werden können. Die einwandfreie Funktion des Multitools
hängt maßgeblich von dessen Zustand ab.
• Multitool regelmäßig reinigen zum Korrosionsschutz mit einem Universalöl einölen.
• Befestigungsschrauben der einzelnen Werkzeuge (13) regelmäßig nachziehen.
Diese Bedienungsanleitung ist zusätzlich unter rosebikes.de/Bedienungsanleitungen verfügbar.
A
4
3
2
1
7
2 mm Innensechskant
8
2,5 mm Innensechskant
9
4 mm Innensechskant
10
5 mm Innensechskant
11
Schlitz-Schraubendreher
12
Einführwerkzeug für Tubeless-Flicken
8
5
7
6
13
EN // OWNER'S MANUAL MINI TOOL // PROD. CODE: 2354113
DANGER
Risk of injury and damage due to improper use of the multi-tool!
Improper use or handling of the wrenches and using the tools for incompatible components may lead to
damages and sudden failure of bike parts!
• Bicycle maintenance works require experience in handling bike components and must only be
carried out by people with sufficient expertise.
• Please note the component manufacturers' instructions.
• Some nuts and bolts on your bike must be tightened to a specified torque. Please use a proper
torque wrench!
• In case of any questions or if in doubt, seek the assistance of a qualified bicycle mechanic.
General information
Please read this manual carefully before using your multi-tool for the first time and make sure you
understand everything. Keep this manual for future reference.
If you sell or give away your multi-tool, please also include the owner's manual.
A
Functions
1
Reamer 3.5 mm
2
Cross-head screwdriver
3
3 mm hex wrench
4
5 mm star key
5
8 mm hex wrench
6
6 mm hex wrench
Maintenance and Care
Regular care and maintenance ensure high durability and reliability, as well as unlimited functionality. ROSE
Bikes recommends carrying out the following tasks:
• Handle the multi-tool with care and make sure to protect it from damages and corrosion during
storage. A proper functioning of the multi-tool largely depends on its condition.
• Regularly clean the multi-tool and grease with universal oil to prevent corrosion.
• Regularly tighten the bolts of the single wrenches (13).
This manual is additionally available as a pdf file on rosebikes.com/manuals
10
11
9
13
7
2 mm hex wrench
8
2,5 mm hex wrenc
9
4 mm hex wrench
10
5 mm hex wrench
11
Flat blade screwdriver
12
Tool for tubeless plugs
12
Need help?
Do you have a question about the MT-12TL and is the answer not in the manual?
Questions and answers