Dahua Technology IPC-HFW2449TL-S-LED-0280B-PRO Quick Start Manual page 10

The username is admin, and the password should be the one that you set while
initializing the device.
Select the devices whose IP addresses need to be changed, and then click Modify IP.
Step 2
Step 3 Configure IP address.
Static mode: Enter Start IP, Subnet Mask, and Gateway, and then the IP addresses of
●
the devices will be modified successively starting from the first IP entered.
DHCP mode: When the DHCP server is available in the network, the IP addresses of
●
devices will be automatically obtained through the DHCP server.
The same IP address will be set for multiple devices if you select the Same IP checkbox.
Click OK.
Step 4
2.3 Logging in to the Webpage
Procedure
Step 1 Open the IE browser, enter the IP address of the device in the address bar, and then press
the Enter key.
If the setup wizard opens, follow the on-screen instructions to complete it.
Enter the username and password in the login box, and then click Login.
Step 2
Step 3 (Optional) For first-time login, click Click Here to Download Plugin, and then install the
plugin as instructed.
The home page opens when the installation is completed.
3
Quick Start Guide