Advertisement
Quick Links
Page 1 of 8
ECC0386R
FITTING INSTRUCTIONS FOR ECC0386R
T
.
HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE
S
.
OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY
D
.
O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT
P
.
LEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS
OR HAVE FITTED BY A QUALIFIED TECHNICIAN.
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF
.
MOUNTING TO THE BIKE
I
,
N THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS
.
THESE RUBBER WASHERS CAN BE THROWN AWAY
DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM:
WWW.RG-RACING.COM
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
www.rg-racing.com
Email:
info@rg-racing.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for R&G ECC0386R
Summary of Contents for R&G ECC0386R
- Page 1 Page 1 of 8 ECC0386R FITTING INSTRUCTIONS FOR ECC0386R HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT...
- Page 2 0 BOLT = 40Nm M12 BOLT = 40Nm LEGEND ITEM NO. DESCRIPTION ITEM 1 ECC0386R ENGINE CASE COVER INCLUDING FITTED SPACERS ITEM 2 M6 x 1.00 x 55mm CAP HEAD BOLTS FITTING PHOTO Picture 1 R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com...
- Page 3 Make sure the engine is cold before proceeding to fit the R&G engine case cover. Ensure the pre-fitted threaded spacers in the casing are hand tight against the inside of the • ECC0386R Engine Case Cover. Remove the 3 engine case bolts circled in Picture 1. •...
- Page 4 Page 4 of 8 ECC0386R CONSUMER NOTICE The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to the order.
- Page 5 Page 5 of 8 ECC0386R NOTICE DE MONTAGE POUR ECC0386R E KIT CONTIENT LES ARTICLES ILLUSTRES ET ETIQUETES SUR LA PAGE ERTAINES PARTIES PEUVENT ETRE PRESENTES UNIQUEMENT POUR LA CLARTE DES INSTRUCTIONS E PAS PROCEDER AU MONTAGE TANT QUE VOUS N...
- Page 6 M8 BOULON = 20Nm 0 BOULON = 40Nm M12 BOULON = 40Nm LÉGENDE ARTICLE NO. DESCRIPTION QTÉ ECC0386R PROTECTION R&G AVEC ENTRETOISES ARTICLE 1 MONTÉES ARTICLE 2 M6 x 1.00 x 55mm BOULONS PHOTO DE MONTAGE Photo 1 R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ...
- Page 7 R&G Assurez-vous que les entretoises filetées préinstallées dans le boîtier soient serrées à la • main contre l'intérieur du couvercle du carter moteur ECC0386R. Retirez les 3 boulons du carter moteur entourés sur l'image 1. • Une fois retirés, placez les boulons dans un endroit sûr au cas où vous retireriez le •...
- Page 8 Page 8 of 8 ECC0386R CONSUMER NOTICE The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to the order.
Need help?
Do you have a question about the ECC0386R and is the answer not in the manual?
Questions and answers