Advertisement
Page 1 of 5
ECC0311R
FITTING INSTRUCTIONS FOR ECC0311R
RHS CLUTCH COVER
HONDA CBR1000RR-R & SP 2020-
T
.
HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE
S
.
OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY
D
.
O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT
P
.
LEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS
OR HAVE FITTED BY A QUALIFIED TECHNICIAN.
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF
.
MOUNTING TO THE BIKE
I
,
N THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS
.
THESE RUBBER WASHERS CAN BE THROWN AWAY
DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM:
WWW.RG-RACING.COM
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
www.rg-racing.com
Email:
info@rg-racing.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for R&G ECC0311R
Summary of Contents for R&G ECC0311R
- Page 1 Page 1 of 5 ECC0311R FITTING INSTRUCTIONS FOR ECC0311R RHS CLUTCH COVER HONDA CBR1000RR-R & SP 2020- HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT...
- Page 2 0 BOLT = 40Nm M12 BOLT = 40Nm LEGEND ITEM NO. DESCRIPTION ITEM 1 ECC0311R ENGINE CASE COVER ITEM 2 M6 x 1.00 x 60mm CAP HEAD BOLT ITEM 3 M6 x 1.00 x 45mm CAP HEAD BOLT FITTING DIAGRAM R&G Racing...
- Page 3 Page 3 of 5 ECC0311R FITTING INSTRUCTIONS • Please make sure the engine is cold before proceeding with the fitting of the R&G cover • To fit the R&G engine case cover remove the three M6 engine case bolts in the positions arrowed in the fitting diagram using an 8mm socket.
- Page 4 Page 4 of 5 ECC0311R NOTICE DE MONTAGE POUR ECC0311R PROTECTION CARTER MOTEUR CÔTÉ DROIT HONDA CBR1000RR-R & SP 2020- E KIT CONTIENT LES ARTICLES ILLUSTRES ET ETIQUETES SUR LA PAGE ERTAINES PARTIES PEUVENT ETRE PRESENTES UNIQUEMENT POUR LA CLARTE DES INSTRUCTIONS...
- Page 5 0 BOULON = 40Nm M12 BOULON = 40Nm LÉGENDE ARTICLE NO. DESCRIPTION QTÉ ARTICLE 1 ECC0311R PROTECTION CARTER MOTEUR ARTICLE 2 M6 x 1.00 x 60mm BOULON ARTICLE 3 M6 x 1.00 x 45mm BOULON NOTICE DE MONTAGE • Veuillez vous assurer que le moteur soit froid avant de procéder au montage de la protection R&G.
Need help?
Do you have a question about the ECC0311R and is the answer not in the manual?
Questions and answers