Advertisement
Quick Links
Page 1 of 6
ECC0390R
FITTING INSTRUCTIONS FOR ECC0390R
T
.
HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE
S
.
OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY
D
.
O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT
P
.
LEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS
OR HAVE FITTED BY A QUALIFIED TECHNICIAN.
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF
.
MOUNTING TO THE BIKE
I
,
N THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS
.
THESE RUBBER WASHERS CAN BE THROWN AWAY
DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM:
WWW.RG-RACING.COM
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Email:
info@rg-racing.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for R&G ECC0390R
Summary of Contents for R&G ECC0390R
- Page 1 Page 1 of 6 ECC0390R FITTING INSTRUCTIONS FOR ECC0390R HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT...
- Page 2 0 BOLT = 40Nm M12 BOLT = 40Nm LEGEND ITEM NO. DESCRIPTION ITEM 1 ECC0390R ENGINE CASE COVER INCLUDING FITTED SPACERS ITEM 2 M6x1.00x50mm CAP HEAD BOLTS FITTING DIAGRAM R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Email: info@rg-racing.com...
- Page 3 Ensure the pre-fitted threaded spacers in the casing are hand tight against the inside of the • ECC0390R Engine Case Cover (Item 1). Remove the four engine case bolts arrow above in the fitting picture. Hold the cover loosely over •...
- Page 4 Page 4 of 6 ECC0390R NOTICE DE MONTAGE POUR ECC0390R E KIT CONTIENT LES ARTICLES ILLUSTRES ET ETIQUETES SUR LA PAGE ERTAINES PARTIES PEUVENT ETRE PRESENTES UNIQUEMENT POUR LA CLARTE DES INSTRUCTIONS E PAS PROCEDER AU MONTAGE TANT QUE VOUS N...
- Page 5 M8 BOULON = 20Nm 0 BOULON = 40Nm M12 BOULON = 40Nm LÉGENDE ARTICLE NO. DESCRIPTION QTÉ ECC0390R PROTECTION CARTER DE DISTRIBUTION ARTICLE 1 INCLUANT ENTRETOISES ARTICLE 2 M6x1.00x50mm BOULONS SCHÉMA DE MONTAGE R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Email: info@rg-racing.com...
- Page 6 Assurez-vous que les entretoises filetées préinstallées dans le carter soient serrées à la main contre • l'intérieur du couvercle du carter moteur ECC0390R (article 1). Retirez les quatre boulons du carter moteur entourés en rouge ci-dessus sur l'image de montage.
Need help?
Do you have a question about the ECC0390R and is the answer not in the manual?
Questions and answers