multicomp pro MP720665 User Manual page 154

Appendix C: Battery Maintenance
Charging the oscilloscope
There will have battery power indication show on the top of panel when oscilloscope
power supplied by the battery (if no indication has appeared, see "Display" on P82 ).
indicates the battery is nearly used up.
Note:
To avoid overheat of battery during charging, the ambient temperature should not be
allowed to exceed the permissible value given in technical specification.
Replacing the Lithium Battery Unit
It is usually not required to replace the battery unit. But when it is required to replace it,
only qualified personnel can carry out this operation, and only use the same specification
lithium battery.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical &
Electronics Equipment (WEEE). Any WEEE marked products must not be mixed with general
household waste, but kept separate for the treatment, recovery and recycling of the materials
used. Contact your local authority for details of recycling schemes in your area.
User Manual
Figure 12-1 Battery level indicator
Riverside One, Sir John Rogerson Quay, Dublin 2 D02 X576 (EU)
150
Battery level indicator
150 Armley Road, Leeds, LS12 2QQ (UK)
Made in China
Man Rev 3.0