Tektronix 91HS8 Operator's Manual Addendum

Tektronix
COMMITTED TO EXCELLENCE
91HS8, 91HSE8
OPERATOR'S MANUAL ADDENDUM
TO THE DAS 9100 SERIES OPERATOR'S MANUAL
(PART NUMBER 070-3624-00, 01, AND UP)
This Tektronix Manual Addendum supports the following products:
91HS8 Data Acquisition Module
91HSE8 Data Acquisition Module
This addendum is designed to be inserted into DAS 9100 Series Operator's Manuals. The 062-
9847-09 manual set is a package consisting of loose leaf binders with manuals and addenda. Each
manual and addendum in the set has its own part number starting with the prefix 070. You can find
your manual part number in the bottom left corner of the manual title page. (Note: Some manuals
may already have this addendum inserted in the backs of their binders. Check your manual to see if
this addendum is a duplicate.)
This addendum contains operator's information specific to the 91HS8 and 91HSE8 Data Acquisi-
tion Modules. it adds information to the DAS 9100 Series Operator's Manual; it does not replace
information.
Refer to the DAS 9100 Series Operator's Manual for information on other products, including
mainframes, instrument modules, probes, and options.
How To Use This Addendum. This addendum is organized similarly to the DAS 9100 Series
Operator's Manual. Information within the addendum corresponds to sections within the opera-
tor's manual.
This addendum affects only some of the operator's manual sections; it does not affect all of them.
Note: You can order extra operator's manual binders by requesting P/N 016-0778-00.
PLEASE CHECK FOR CHANGE INFORMATION
AT THE REAR OF THIS MANUAL
070-5768-02
(part of pkg. 062-5847-09)
Product Group 57 REVISED PRINTING FEBRUARY 1986