Download Print this page
Whalen Thannon BBAVCL60-FB-1 Instruction Booklet

Whalen Thannon BBAVCL60-FB-1 Instruction Booklet

60" tv stand

Advertisement

Available languages

Available languages

Quick Links

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where
it was purchased. Please call our toll-free customer service number and have your instructions and parts list
ready to provide the model name, part name or factory number:
Or visit our website 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
60" TV Stand
Model # BBAVCL60-FB-1
ADULT ASSEMBLY REQUIRED
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
www.whalenfurniture.com
Or e-mail your request to parts@whalenfurniture.com
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2024-06-15
1-866-942-5362
Rev. 0001-A
LOT NUMBER:
DATE PURCHASED: / /

Advertisement

loading
Need help?

Need help?

Do you have a question about the Thannon BBAVCL60-FB-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Whalen Thannon BBAVCL60-FB-1

  • Page 1 LOT NUMBER: DATE PURCHASED: / / 60" TV Stand Model # BBAVCL60-FB-1 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our toll-free customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 1-866-942-5362 Pacific Standard Time: 8:30 a.m.
  • Page 2 IMPORTANT Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-abrasive surface. You will need the parts identified on page 3, 4 and 5 of this instruction manuals. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH THE DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH A DAMP CLOTH.
  • Page 3 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Middle Top Panel B- Middle Partition C- Middle Front Trim (Qty. 1) (Qty. 2) (Qty. 2) D- Middle Crossbar E- Middle Bottom Panel F- Middle Front Skirting...
  • Page 4 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. P- Left Rear Skirting Q- Left Side Skirting R- Right Top Panel (Qty. 1) (Qty. 1) (Qty. 1) S- Right Bottom Panel T- Right Front Skirting U- Right Rear Skirting...
  • Page 5 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. (1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel (Qty. 50+2 extra) (Qty. 50+2 extra) (Qty.
  • Page 6 Assembly Instructions ② x 14 NOTE: Please do not fully tighten all bolts/screws until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make it easier during assembly of unit. 1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratch.
  • Page 7 Assembly Instructions ③ x 12 3. Glue the 30 mm Wood Dowels (3) into the designated holes of the Middle Skirtings (F and G) and Middle Bottom Stretchers (H and I). Tap in with a rubber mallet, if necessary. NOTE: It is very important to use a small amount of glue on both ends of all dowels and wipe away the excess glue immediately with a damp cloth.
  • Page 8 Assembly Instructions ① x 2 The cam lock housings face inward. 4. Align and attach the Middle Rear Skirting (G) between the Middle Bottom Stretchers (H and I) by engaging and tightening two Cam Locks (1) with a Phillips screwdriver.
  • Page 9 Assembly Instructions ① x 2 5. Align and attach the Middle Front Skirting (F) to the Middle Bottom Stretchers (H and I) by engaging and tightening two Cam Locks (1) with a Phillips screwdriver.
  • Page 10 Assembly Instructions 180° ① x 10 6. Align and attach the previous assembly to the Middle Bottom Panel (E) by engaging and tightening ten Cam Locks (1).
  • Page 11 Assembly Instructions 180° ② x 4 7. Securely screw the Cam Bolts (2) into the designated small holes on the top of the Middle Bottom Panel (E) using a Phillips screwdriver.
  • Page 12 Assembly Instructions ② x 8 8. Securely screw the Cam Bolts (2) into the designated small holes on the Middle Top Panel (A) and the Middle Front Trims (C) using a Phillips screwdriver.
  • Page 13 Assembly Instructions ③ x 14 9. Glue the 30 mm Wood Dowels (3) into the inner holes of the Middle Partitions (B) and the Middle Crossbar (D).
  • Page 14 Assembly Instructions The outer edges are flush with each other. ① x 4 10. Orien and attach one Middle Front Trim (C) to one Middle Partition (B) by engaging and tightening two Cam Locks (1) with a Phillips screwdriver. 11. Repeat the same process to combine the other Trim (C) and Middle Partition (B) together.
  • Page 15 Assembly Instructions ① x 4 12. Orient and attach one Middle Partition (B) to the Middle Bottom Panel (E) by engaging and tightening two Cam Locks (1). 13. Repeat the same process to attach the other Middle Partition (B) at the opposite end.
  • Page 16 Assembly Instructions ⑥ x 3 14. Fasten the Middle Crossbar (D) to the Middle Top Panel (A) with three 38 mm Pan Head Screws (6).
  • Page 17 Assembly Instructions The crossbar lines up with the middle trims. ① x 4 15. Properly position the Middle Top Panel (A) so that the cam bolts enter the holes in top edge of both Middle Partitions (B) and fasten them into place by engaging four Cam Locks (1) with a Phillips screwdriver.
  • Page 18 Assembly Instructions ⑧ x 8 16. Align and attach four Plastic Connectors (11) to each Side Skirting (X) with one 12 mm Bolt (8) per connector.
  • Page 19 Assembly Instructions ② x 8 17. Securely screw the Cam Bolts (2) into the designated small holes on the Left Bottom Panel (N), the Left Front Skirting (O) and the Left Side Skirting (Q) using a Phillips screwdriver.
  • Page 20 Assembly Instructions ③ x 8 18. Glue the 30 mm Wood Dowels (3) into the designated holes of the Left Front Skirting (O), the Left Rear Skirting (P) and Left Side Skirting (Q).
  • Page 21 Assembly Instructions ① x 1 19. Align and attach the Left Rear Skirting (P) to the Left Side Skirting (Q) by engaging and tightening one Cam Lock (1) with a Phillips screwdriver.
  • Page 22 Assembly Instructions ⑧ x 1 20. Align and attach one Side Bottom Stretcher (X) to the Left Rear Skirting (P) by inserting one 12 mm Bolt (8) through the installed Plastic Connector (11) and securely screw into place.
  • Page 23 Assembly Instructions ① x 1 ⑧ x 1 21. Align and attach the Left Front Skirting (O) to the Left Side Skirting (Q) by engaging and tightening one Cam Lock (1). 22. Fasten the Left Front Skirting (O) to the Side Skirting (X) by inserting one 12 mm Bolt (8) through the installed Plastic Connector (11) and securely screw into place.
  • Page 24 Assembly Instructions 180° ① x 6 23. Align and attach the previous assembly to the Left Bottom Panel (N) by engaging and tightening six Cam Locks (1).
  • Page 25 Assembly Instructions ⑧ x 2 24. Fasten the Side Bottom Stretcher (X) to the Left Bottom Panel (N) with two 12 mm Bolts (8).
  • Page 26 Assembly Instructions 180° ② x 2 25. Turn the assembled left base upright. 26. Securely screw two Cam Bolts (2) into the designated small holes on the top of the Left Bottom Panel (N) using a Phillips screwdriver.
  • Page 27 Assembly Instructions ② x 2 27. Securely screw two Cam Bolts (2) into the designated small holes on the Left Top Panel (M) using a Phillips screwdriver.
  • Page 28 Assembly Instructions ③ x 6 28. Glue the 30 mm Wood Dowels (3) into the inner holes of the Left Top Panel (M) and one Side Panel (W).
  • Page 29 Assembly Instructions The hinge support faces inward and is located at front side. ① x 2 Floor leveler 29. Orient and attach the Side Panel (W) to the Left Bottom Panel (N) by engaging and tightening two Cam Locks (1) with a Phillips screwdriver.
  • Page 30 Assembly Instructions ① x 2 30. Align and attach the Left Top Panel (M) to the Side Panel (W) by engaging and tightening two Cam Locks (1) with a Phillips screwdriver.
  • Page 31 Assembly Instructions 31. Glue two 20 mm Wood Dowels (13) into the designed holes on the Side Bottom Stretcher (X).
  • Page 32 Assembly Instructions ② x 8 32. Securely screw the Cam Bolts (2) into the designated small holes on the Right Bottom Panel (S), Right Front Skirting (T) and Right Side Skirting (V), using a Phillips screwdriver.
  • Page 33 Assembly Instructions ③ x 8 33. Glue the 30 mm Wood Dowels (3) into the designated holes of the Right Front Skirting (T), the Right Rear Skirting (U) and Right Side Skirting (V).
  • Page 34 Assembly Instructions ① x 1 34. Align and attach the Right Rear Skirting (U) to the Right Side Skirting (V) by engaging and tightening one Cam Lock (1) with a Phillips screwdriver.
  • Page 35 Assembly Instructions ⑧ x 1 35. Align and attach the other Side Bottom Stretcher (X) to the Right Rear Skirting (U) by inserting one 12 mm Bolt (8) through the installed Plastic Connector (11) and securely screw into place.
  • Page 36 Assembly Instructions ① x 1 ⑧ x 1 36. Align and attach the Right Front Skirting (T) to the Right Side Skirting (V) by engaging and tightening one Cam Lock (1). 37. Fasten the Right Front Skirting (T) to the Side Bottom Stretcher (X) by inserting one 12 mm Bolt (8) through the installed Plastic Connector (11) and securely screw into place.
  • Page 37 Assembly Instructions 180° ① x 6 38. Align and attach the previous assembly to the Right Bottom Panel (S) by engaging and tightening six Cam Locks (1).
  • Page 38 Assembly Instructions ⑧ x 2 39. Fasten the Side Bottom Stretcher (X) to the Right Bottom Panel (S) by inserting two 12 mm Bolts (8) through the installed Plastic Connector (11) and securely screw into place.
  • Page 39 Assembly Instructions 180° ② x 2 40. Turn the assembled right base upright. 41. Securely screw two Cam Bolts (2) into the designated small holes on the top of the Right Bottom Panel (S) using a Phillips screwdriver.
  • Page 40 Assembly Instructions ② x 2 42. Securely screw two Cam Bolts (2) into the designated small holes on the Right Top Panel (R) using a Phillips screwdriver.
  • Page 41 Assembly Instructions ③ x 6 43. Glue the 30 mm Wood Dowels (3) into the inner holes of the Right Top Panel (R) and the other Side Panel (W).
  • Page 42 Assembly Instructions The hinge support faces inward and is located at front side. ① x 2 Floor leveler 44. Orient and attach the Side Panel (W) to the Right Bottom Panel (S) by engaging and tightening two Cam Locks (1) with a Phillips screwdriver.
  • Page 43 Assembly Instructions ① x 2 45. Align and attach the Right Top Panel (R) to the Side Panel (W) by engaging and tightening two Cam Locks (1) with a Phillips screwdriver.
  • Page 44 Assembly Instructions 46. Glue two 20 mm Wood Dowels (13) into the designated holes of the Side Bottom Stretcher (X).
  • Page 45 Assembly Instructions ⑨ x 8 47. Line up the assembled units on a level and protected surface and combine them together, using the inserted wood dowels as a guide. 48. Insert four 30 mm Bolts (9) through the mounting holes on the Middle Left Bottom Stretcher (H) and screw into the Side Bottom Stretcher (X).
  • Page 46 Assembly Instructions ⑩ x 4 50. Proceed to insert four 60 mm Bolts (10) through the mounting holes on the subframe of Middle Top Panel (A) and securely screw into the Side Top Panels (M and R).
  • Page 47 Assembly Instructions Adhesive tape faces outward. 180° ④ x 40 51. Now, go back and tighten all Cam Locks and Screws. Make sure that all the parts are tight and there are no gaps between the parts, this will help keep the unit square. 52.
  • Page 48 Assembly Instructions 90° 55. Ask for assistance to stand the assembled unit upright and position it near the desired location. 56. Completely tilt one Small Adjustable Shelf (Y) into left compartment as shown, then hold it horizontally to the upper portion of the compartment. 57.
  • Page 49 Assembly Instructions ⑤ x 3 59. Using the pilot holes as a guide, fasten the Reinforcement Tube (L) to the bottom of the Large Adjustable Shelf (K) with three 27 mm Pan Head Screws (5). 60. Completely tilt the Large Adjustable Shelf (K) into the middle compartment as shown, then hold it horizontally to the upper portion of the compartment.
  • Page 50 Assembly Instructions ⑦ x 8 62. Extend two Door Hinges (B1) and rest the hinge cups onto the cutouts of each Door (A1). Secure the Door Hinges (B1) in place by using two 15 mm Screws (7) in each hinge.
  • Page 51 Assembly Instructions 63. Attach one Handle (C1) to the front of each Door (A1) with two 21 mm Bolts (14).
  • Page 52 Assembly Instructions Oval hole ⑦ x 16 Round hole Depth Vertical Horizontal Adjustment Adjustment Adjustment 64. Pick up one Door (A1) and attach the installed Door Hinges (B1) to one Side Panel (W), using the pilot holes as a guide. Turn four 15 mm Nickel Screws (7) a few turns through the CENTERS of the oval holes in the hinges.
  • Page 53 Assembly Instructions x 20 68. Plug the Cam Lock Covers (15) onto the visible cam locks to conceal the cams. 69. Stick the Rubber Bumpers (16) on the outer corners of the Doors (A1) where the Middle Front Trims (C) are in contact with.
  • Page 54 Assembly Instructions NOTE: To prevent your TV from tipping, you must install the acrylic TV stopper if you place a flat panel television on the top panel. Otherwise, skip to step 70. 70. Remove the paper backing of Acrylic Stopper (17), then properly align the acrylic stopper into the cutout on the acrylic stopper template on the front of the Middle Top Panel (A).
  • Page 55 Assembly Instructions Wooden stud Wall Long screw Wall Wall Metal bracket Short screw Connector Wall Steel cable Floor leveler Tools required (not provided): Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8” drill bit. 72. Ask for assistance to position the assembled unit at the desired location against a wall. If necessary, adjust the floor levelers to correct the tilting and level the doors.
  • Page 56 IMPORTANT NOTICE PLEASE READ 23” HLA INSERT 23” OPP INSERT NOTE: This unit has been designed to be a mantel which can accommodate a 25" W x 18" H fireplace insert. You can buy our 23” electric fireplace (model # SP23L-FOPP-CR or SP23L-BHLA-CR, sold separately) and combine with this console.
  • Page 57 Care and Maintenance  Use a soft, clean cloth that will not scratch the surface when dusting.  Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area.  Using solvents of any kind on your furniture may damage the finish. ...
  • Page 58 Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
  • Page 59 NÚMERO de LOTE:__________ FECHA de COMPRA: / / Consola para TV de 60” Modelo # BBAVCL60-FB-1 ENSAMBLE REQUERIDO POR ADULTO Si tienen alguna pregunta acerca del ensamble o si alguna parte está faltante, no retorne esté producto a la tienda donde lo compro. Por favor llame a nuestro departamento de ayuda al cliente teniendo su instructivo y lista de partes para proveer el modelo, nombre de parte o el número de fábrica: 1-866-942-5362 Hora estándar del Pacífico: 8:30 a.m.
  • Page 60 IMPORTANTE Antes de comenzar: Abra, identifique y cuente todas las partes antes del ensamble. Coloque las piezas sobre una superficie plana y no abrasiva. Tendrá las partes identificadas en la página 3, 4 y 5 de este manual de instrucciones. NOTA: ES MUY IMPORTANTE EL USO DE GOMA CON LAS CLAVIJAS DE MADERA.
  • Page 61 Lista de partes y material de ferretería Por favor lea completamente las instrucciones y verifique que estén todas las partes y partes de ferretería antes de iniciar el ensamblado. A- Panel superior medio B- Divisor medio C- Borde medio frontal (Cant.
  • Page 62 Lista de partes y material de ferretería Por favor lea completamente las instrucciones y verifique que estén todas las partes y partes de ferretería antes de iniciar el ensamblado. P- Moldura izquierda posterior Q- Moldura izquierda R- Panel derecho superior (Cant.
  • Page 63 Lista de partes y material de ferretería Por favor lea completamente las instrucciones y verifique que estén todas las partes y partes de ferretería antes de iniciar el ensamblado. (1) Tuerca de fijación (2) Perno de fijación (3) Clavija de madera de M8 x 30 mm (Cant.
  • Page 64 Instructivo de ensamble ② x 14 NOTA: Por favor no apriete completamente todos los pernos, hasta que termine con el ensamble de las partes. Después, asegúrese de apretar todos los pernos. Esto hará el ensamble más fácil. 1. Desempacar la unidad y confirmar que se tiene todo el material de ferretería y partes requeridas. Ensamblar la unidad en un piso alfombrado o en el cartón vacío para evitar rasguños.
  • Page 65 Instructivo de ensamble ③ x 12 3. Pegar las clavijas de madera de 30 mm (3) en los agujeros designados de las molduras medias (F y G) y en los soportes medios inferiores (H y I). Meter con el mazo de goma, si fuera necesario. NOTA: Es importante usar una cantidad pequeña de pegamento en ambos lados de las clavijas y limpiar el exceso de pegamento inmediatamente con una toalla húmeda.
  • Page 66 Instructivo de ensamble ① x 2 Los espacios de las tuercas de fijación apuntan hacia adentro. 4. Alinear y adjuntar la moldura media posterior (G) entre los soportes medios inferiores (H y I) empleando y apretando 2 tuercas de fijación (1) con el desarmador estrella.
  • Page 67 Instructivo de ensamble ① x 2 5. Alinear y adjuntar la moldura media frontal (F) a los soportes medios inferiores (H y I) empleando y apretando 2 tuercas de fijación (1) con el desarmador estrella.
  • Page 68 Instructivo de ensamble 180° ① x 10 6. Alinear y adjuntar ensamble previo al panel medio inferior (E) empleando y apretando 10 tuercas de fijación (1).
  • Page 69 Instructivo de ensamble 180° ② x 4 7. Atornillar los pernos de fijación (2) en los agujeros pequeños designados en la parte superior del panel medio inferior (E) usando el desarmador de estrella.
  • Page 70 Instructivo de ensamble ② x 8 8. Atornillar los pernos de fijación (2) en los agujeros pequeños designados en el panel medio superior (A) y en los bordes medio frontales (C) usando el desarmador estrella.
  • Page 71 Instructivo de ensamble ③ x 14 9. Pegar las clavijas de madera de 30 mm (3) en los agujeros internos en los divisores medios (B) y en el soporte medio (D).
  • Page 72 Instructivo de ensamble Los bordes exteriores están nivelados los unos con los otros ① x 4 10. Orientar y adjuntar un borde medio frontal (C) a un divisor medio (B) empleando y apretando 2 tuercas de fijación (1) con el desarmador de estrella. 11.
  • Page 73 Instructivo de ensamble ① x 4 12. Orientar y adjuntar un divisor medio (B) al panel medio inferior (E) empleando y apretando 2 tuercas de fijación (1). 13. Repetir el mismo proceso para adjuntar el otro divisor medio (B) al extremo opuesto.
  • Page 74 Instructivo de ensamble ⑥ x 3 14. Sujetar el soporte medio (D) al panel medio superior (A) con 3 pernos de cabeza redonda de 38 mm (6).
  • Page 75 Instructivo de ensamble El soporte se alinea con los bordes medios. ① x 4 15. Posicionar apropiadamente el panel medio superior (A) de tal manera que los pernos de fijación entren en los agujeros en el borde superior de ambos divisores medios (B) y sujetar en su lugar empleando cuatro tuercas de fijación (1) con el desarmador estrella.
  • Page 76 Instructivo de ensamble ⑧ x 8 16. Alinear y adjuntar cuatro conectores de plástico (11) a cada moldura lateral (X) con un perno de 12 mm (8) por conector.
  • Page 77 Instructivo de ensamble ② x 8 17. Atornillar los pernos de fijación (2) en los agujeros pequeños designados en el panel izquierdo inferior (N), en la moldura izquierda frontal (O) y en la moldura izquierda (Q) usando el desarmador de estrella.
  • Page 78 Instructivo de ensamble ③ x 8 18. Pegar las clavijas de madera de 30 mm (3) en los agujeros designados en la moldura izquierda frontal (O), en la moldura izquierda posterior (P) y en la moldura izquierda (Q).
  • Page 79 Instructivo de ensamble ① x 1 19. Alinear y adjuntar la moldura izquierda posterior (P) a la moldura izquierda (Q) empleando y apretando una tuerca de fijación (1) con el desarmador estrella.
  • Page 80 Instructivo de ensamble ⑧ x 1 20. Alinear y adjuntar un soporte lateral inferior (X) a la moldura izquierda (P) insertando un perno de 12 mm (8) a través de los conectores de plástico instalados (11) y atornillar en su lugar.
  • Page 81 Instructivo de ensamble ① x 1 ⑧ x 1 21. Alinear y adjuntar la moldura izquierda frontal (O) a la moldura izquierda (Q) empleando y apretando una tuerca de fijación (1). 22. Sujetar la moldura izquierda frontal (O) a la moldura lateral (X) insertando un perno de 12 mm (8) a través de los conectores de plástico instalados (11) y atornillar en su lugar.
  • Page 82 Instructivo de ensamble 180° ① x 6 23. Alinear y adjuntar el ensamble previo al panel izquierdo inferior (N) empleando y apretando 6 tuercas de fijación (1).
  • Page 83 Instructivo de ensamble ⑧ x 2 24. Sujetar el soporte lateral inferior (X) al panel izquierdo inferior (N) con 2 pernos de 12 mm (8).
  • Page 84 Instructivo de ensamble 180° ② x 2 25. Poner la base ensamblada izquierda en posición vertical. 26. Atornillar 2 pernos de fijación (2) en los espacios pequeños designados en la parte superior del panel izquierdo inferior (N) usando el desarmador estrella.
  • Page 85 Instructivo de ensamble ② x 2 27. Atornillar 2 pernos de fijación (2) en los agujeros pequeños designados en el panel izquierdo superior (M) usando el desarmador estrella.
  • Page 86 Instructivo de ensamble ③ x 6 28. Pegar las clavijas de madera de 30 mm (3) en los espacios interiores del panel izquierdo superior (M) y de un panel lateral (W).
  • Page 87 Instructivo de ensamble El soporte para bisagra apunta hacia adentro y está en el lado frontal. ① x 2 Nivelador de piso 29. Orientar y adjuntar el panel lateral (W) al panel izquierdo inferior (N) empleando y apretando 2 tuercas de fijación (1) con el desarmador de estrella.
  • Page 88 Instructivo de ensamble ① x 2 30. Alinear y adjuntar el panel izquierdo superior (M) al panel lateral (W) empleando y apretando 2 tuercas de fijación (1) con el desarmador de estrella.
  • Page 89 Instructivo de ensamble 31. Pegar 2 clavijas de madera de 20 mm (13) en los agujeros designados en el soporte lateral inferior (X).
  • Page 90 Instructivo de ensamble ② x 8 32. Atornillar a los pernos de fijación (2) en los agujeros pequeños designados en el panel derecho inferior (S), en la moldura derecha frontal (T) y en la moldura derecha (V), usando desarmador estrella.
  • Page 91 Instructivo de ensamble ③ x 8 33. Pegar las clavijas de 30 mm (3) en los agujeros designados en la moldura derecha frontal (T), en la moldura derecha posterior (U) y en la moldura derecha (V).
  • Page 92 Instructivo de ensamble ① x 1 34. Alinear y adjuntar la moldura derecha posterior (U) a la moldura derecha (V) empleando y apretando una tuerca de fijación (1) con el desarmador de estrella.
  • Page 93 Instructivo de ensamble ⑧ x 1 35. La línea y adjuntar el otro soporte lateral inferior (X) a la moldura derecha posterior (U) insertando un perno de 12 mm (8) a través de los conectores de plástico instalados (11) y atornillar en su lugar.
  • Page 94 Instructivo de ensamble ① x 1 ⑧ x 1 36. Alinear y adjuntar la moldura derecha frontal (T) a la moldura derecha (V) empleando y apretando una tuerca de fijación (1). 37. Sujetar la moldura derecha frontal (T) al soporte lateral inferior (X) insertando un perno de 12 mm (8) a través de los conectores de plástico instalados (11) y atornillar en su lugar.
  • Page 95 Instructivo de ensamble 180° ① x 6 38. Alinear y adjuntar el ensamble previo al panel derecho inferior (S) empleando y apretando 6 tuercas de fijación (1).
  • Page 96 Instructivo de ensamble ⑧ x 2 39. Sujetar el soporte lateral inferior (X) al panel derecho inferior (S) insertando un perno de 12 mm (8) a través de los conectores de plástico instalados (11) y atornillar en su lugar.
  • Page 97 Instructivo de ensamble 180° ② x 2 40. Poner la base derecha ensamblada en posición vertical. 41. Atornillar 2 pernos de fijación (2) en los agujeros pequeños designados en la parte superior del panel derecho inferior (S) usando el desarmador estrella.
  • Page 98 Instructivo de ensamble ② x 2 42. Atornillar 2 pernos de fijación (2) en los agujeros pequeños designados en el panel derecho superior (R) usando el desarmador estrella.
  • Page 99 Instructivo de ensamble ③ x 6 43. Pegar las clavijas de madera de 30 mm (3) en los agujeros internos del panel derecho superior (R) y del otro panel lateral (W).
  • Page 100 Instructivo de ensamble El soporte para bisagra apunta hacia adentro y está en el lado frontal. ① x 2 Nivelador de piso 44. Orientar y adjuntar el panel lateral (W) al panel derecho inferior (S) empleando y apretando 2 tuercas de fijación (1) con el desarmador de estrella.
  • Page 101 Instructivo de ensamble ① x 2 45. Alinear y adjuntar el panel derecho superior (R) al panel lateral (W) empleando y apretando 2 tuercas de fijación (1) con el desarmador de estrella.
  • Page 102 Instructivo de ensamble 46. Pegar 2 clavijas de madera de 20 mm (13) en los agujeros designados del soporte lateral inferior (X).
  • Page 103 Instructivo de ensamble ⑨ x 8 47. Alinear las unidades ensambladas en una superficie nivelada y protectora y combinar las juntas, usando las clavijas de madera insertadas como guía. 48. Insertar cuatro pernos de 30 mm (9) a través de los agujeros de montaje en el soporte medio izquierdo inferior (H) y atornillar en el soporte lateral inferior (X).
  • Page 104 Instructivo de ensamble ⑩ x 4 50. Proceder a insertar cuatro pernos de 60 mm (10) a través de los agujeros de montaje en el marco secundario del panel medio superior (A) y atornillar en los paneles laterales superiores (M y R).
  • Page 105 Instructivo de ensamble La cinta adhesiva apunta hacia afuera. 180° ④ x 40 51. Ahora, volver y apretar todas las tuercas y pernos de fijación. Asegurar de que todas las partes estén apretadas y que no haya espacios entre las piezas. Esto ayudará a mantener la unidad cuadrada. 52.
  • Page 106 Instructivo de ensamble 90° y cerca del lugar deseado. Pedir asistencia para poner la unidad en posición vertical 56. Inclinar completamente una repisa ajustable pequeña (Y) en el compartimiento izquierdo como se muestra, luego mantener horizontalmente a la porción superior del compartimiento. 57.
  • Page 107 Instructivo de ensamble ⑤ x 3 59. Usando los agujeros pilotos como guía, sujetar el tubo de refuerzo (L) a la parte inferior de la repisa ajustable grande (K) con 3 pernos de cabeza redonda de 27 mm (5). 60. Inclinar completamente una repisa ajustable grande (K) en el compartimiento medio como se muestra, luego mantener horizontalmente a la porción superior del compartimiento.
  • Page 108 Instructivo de ensamble ⑦ x 8 62. Extender 2 bisagras para puerta (B1) y descansar las copas de las bisagras sobre los recortes de cada puerta (A1). Asegurar las bisagras para puertas (B1) en su lugar usando 2 pernos de 15 mm (7) en cada bisagra.
  • Page 109 Instructivo de ensamble 63. Adjuntar una manija (C1) al lado frontal de cada puerta (A1) con 2 pernos de 21 mm (14).
  • Page 110 Instructivo de ensamble Agujero ovalado ⑦ x 16 Agujero redondo Ajuste de Ajuste Ajuste profundidad vertical horizontal 64. Tomar una puerta (A1) y adjuntar las bisagras para puerta instaladas (B1) a un panel lateral (W), usando los agujeros piloto como guía. Girar cuatro pernos de 15 mm (7) unas vueltas a través de los CENTROS de los agujeros ovales en las bisagras.
  • Page 111 Instructivo de ensamble x 20 68. Enchufar las tapas de las tuercas de fijación (15) sobre las tuercas de fijación visibles para esconder. 69. Pegar los topes de plástico (16) a las esquinas exteriores de las puertas (A1) donde los bordes medios frontales (C) entran en contacto los unos con los otros.
  • Page 112 Instructivo de ensamble NOTA: Para prevenir que se caiga su TV, usted debe instalar el riel tope si pone una televisión de pantalla plana sobre el panel superior. De otra manera, sáltese al paso 70. 70. Retirar el respaldo de papel del tope de acrílico (17), luego alinear apropiadamente el tope de acrílico con el borde superior del temple del tope de acrílico en el frente del panel medio superior (A).
  • Page 113 Instructivo de ensamble Viga de madera Pared Perno largo Pared Pared Soporte de metal Perno corto Conector Pared Cable de acero Nivelador de piso Herramientas requeridas (no incluidas): Desarmador estrella, buscador de vigas, cinta métrica, lápiz, taladro y broca de 1/8 pulgadas. 72.
  • Page 114 NOTA IMPORTANTE POR FAVOR LEA INSERTO HLA DE 23 PULGADAS INSERTO OPP DE 23 PULGADAS NOTA: Esta unidad fue diseñada para hacer un marco que puede acomodar un inserto de chimenea de 25 pulgadas de ancho x 18 pulgadas de alto. Usted puede comprar nuestra chimenea eléctrica (modelo # SP23L- FOPP-CR o SP23L-BHLA-CR, vendida por separado) y combinarla con esta consola.
  • Page 115 Mantenimiento y cuidados  Use una toalla suave y limpia para evitar daños y rayaduras.  Uso de cera para pulir muebles no es necesario. Si desea usar cera, pruébela en un área que no sea visible para revisar su funcionamiento. ...
  • Page 116 Si esté producto tiene algún defecto de ensamble o material, o si tiene alguna falla en uso normal, nosotros lo repararemos o lo re-emplazaremos hasta por un año a partir de la fecha de compra. Todo producto de Whalen Furniture es diseñado para alcanzar sus expectativas más altas. Nosotros le garantizamos que inmediatamente podrá...