Page 1
LOT NUMBER: DATE PURCHASED: / 54" TV Console Model # BBAVCD54N ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our toll-free customer service number and have...
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
Page 3
Model # BBAVCD54N Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Console Top with Frame (1) B- Upper Metal Frame (1) C- Bottom Panel with Metal Frame (1)
Page 4
Model # BBAVCD54N Assembly Instructions Flat Washer 1-1/4” Bolt Lock Washer (4 used in this step) (4 used in this step) (4 used in this step) ② ③ ④ NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts.
Page 5
Model # BBAVCD54N Assembly Instructions Flat Washer 3/4” Bolt Lock Washer (8 used in this step) (8 used in this step) (8 used in this step) ③ ④ ① 4. Align and attach Left and Right Legs (D and E) to last assembly using two 3/4” Bolts (1) and two Washers (3 and 4) per leg.
Page 6
Model # BBAVCD54N Assembly Instructions FRONT Flat Washer 3/4” Bolt Lock Washer (4 used in this step) (4 used in this step) (4 used in this step) ③ ④ ① 5. Fit the Bottom Panel with Metal Frame (C) between the 4 Legs (D and E) and fasten it in place by inserting four 3/4”...
Page 7
Model # BBAVCD54N Assembly Instructions 3/4” Bolt (4 used in this step) ① 7. Stand the unit upright. 8. Fasten 2 Cable Wheels (F) to the backside of the console using two 3/4” Bolts (2) per wheel. The Cable Wheels allow you to organize, route and separate your component cords and cables to minimize tangling and signal interference.
Page 8
Model # BBAVCD54N Assembly Instructions Acrylic Stopper (1 used in this step) ⑤ NOTE: You must install the Acrylic TV Stopper to prevent TV from tipping when placing your flat panel television directly on the table-top console. 9. Remove the tape of Acrylic Stopper (5) and place it in the cut-out of the acrylic stopper template on the front of the Console Top (A).
Page 9
Model # BBAVCD54N Assembly Instructions Tools required: Phillips screwdriver, Power Drill, 3/8” Drill Bit and Rubber Mallet. 11. Ask for assistance to position the assembled unit at the desired location against a wall. 12. In case of uneven floors, Floor Levelers are provided at the bottom of the Legs (D and E) for the necessary adjustment.
Model # BBAVCD54N Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish.
Need help?
Do you have a question about the BBAVCD54N and is the answer not in the manual?
Questions and answers