signia CROS Pure C&G IX User Manual page 17

Switching to standby mode
Via remote control, you can switch your hearing aids to
standby mode. This mutes the hearing aids. When you
leave standby mode, the previously used volume and
hearing program are set.
Note:
●
In standby mode, the hearing aids are not turned off
completely. They draw some power.
Therefore we recommend to use standby mode only
for a short period of time.
●
If you want to leave standby mode, but the remote
control is not at hand: Turn your hearing aids off and
on again (via rocker switch or by shortly placing them
in the charger until one or more LEDs light up). In this
case, the default volume and hearing program are
set.
17