EWM L1.04 - RC XQ Expert 2.0 Rob Operating Instructions Manual page 15

4 Quick overview
4.1 Machine control – Operating elements
Item Symbol
1
2
3
4
5
6
7
8 A B C D Push-buttons A B C D (depending on context) > see 5.3 chapter
099-00L104-EW501
16.08.2024
Description 0
Push-button for system settings
Display f or system and conf iguration of system settings > see 5.4.4 chapter.
Machine display
Machine display showing all machine functions, menus and parameters with their val-
ues > see 4.3 chapter.
Push-button for USB interface
Operation and settings of the USB interf ace > see 5.5 chapter.
USB interface USB for offline data transfer
Connection capability for a USB flash drive - industrial USB f lash drive recommended
(FAT32).
Rotary knob (click wheel ) for welding power
• ----------- Setting the welding power > see 5.1 chapter
• ----------- Setting various parameters values depending on the preselection.
(Settings can be made when the backlight is activated.)
Rotary knob (click wheel ) for correction of arc
• ----------- Setting the correction of arc length
• ----------- Setting the arc dynamics
Settings can be made when the backlight is activated.
Interface - Xbutton
Welding release with user-def ined rights to protect against unauthorised
use > see 5.4.2 chapter.
Machine control – Operating elements
Figure 4-1
Quick overview
15