EWM L1.04 - RC XQ Expert 2.0 Rob Operating Instructions Manual page 13

3 Intended use
Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and stand-
ards applicable for use in industry and trade. It may only be used for the welding proce-
dures indicated at the rating plate. Hazards may arise for persons, animals and material
objects if the equipment is not used correctly. No liability is accepted for any damages
arising from improper usage!
• The equipment must only be used in line with its designated purpose and by trained or ex-
pert personnel!
• Do not improperly modif y or convert the equipment!
3.1 Use and operation solely with the following machines
The f ollowing system components can be combined:
This description may be applied only to machines with the RC XQ Expert 2.0 Rob machine control.
Machine control RC XQ Expert 2.0 Rob RC XQ Expert 2.0 Rob LG RC XQ Expert 2.0 Rob WLG
Description
3.2 Software version
The machine control software version is shown on the screen during the start pro-
cess > see 4.3.4 chapter.
3.3 Applications
Device control of multi-process welding machines for arc welding covering the f ollowing welding proce-
dures:
Machine series MIG/MAG standard arc
Titan XQ R AC
Titan XQ R
Phoenix XQ R
[1]
All EWM React-based processes are available only in devices of type Ti-
tan XQ R AC/Titan XQ R with an activated process license.
[2] Aluminium welding task.
3.4 Documents which also apply
• Operating instructions f or the connected welding machines
• Documents of the optional expansions
099-00L104-EW501
16.08.2024
No network connection Version with LAN
Use and operation solely with the f ollowing machines
WARNING
MIG/ MAG - pulsed arc
Intended use
Version with WiFi and LAN
[2]
13