EWM L1.04 - RC XQ Expert 2.0 Rob Operating Instructions Manual page 14

Intended use
Documents which also apply
3.4.1 Part of the complete documentation
This document is part of the complete documentation and valid only in combination with all other
parts of these instructions! Read and observe the operating instructions for all system compo-
nents, especially the safety instructions!
The illustration shows a general example of a welding system.
Item Operating instructions
A.1 Robot
A.2 Wire buf f er
A.3 Wire f eeder, media separation box
A.4 Robot interf ace
A.5 Power source
A.6 Control
A.7 Remote control
A.8 Push/pull drive
A.9 Welding torch
A.10 Collision sensor
A Overall documentation
14
Figure 3-1
099-00L104-EW501
16.08.2024