GE phoenix x aminer Operating Manual page 99

11.2 Dismantling
Disconnecting the system from
the mains
Disposing of operating fluids
Dismantling the individual
components
2011-08-30
Before commencing the dismantling procedure:
Personnel: Qualified electricians
1. Switch off the system and secure it against being switched back on.
2. Physically disconnect the system from the entire power supply and discharge
all accumulated electric charge.
Personnel: Authorized qualified personnel
Protective equipment:
WARNING!
Risk of injury due to improper handling of operating
fluids!
Contact with detergents, grease or oils can put your health
at risk.
• Observe the manufacturer's safety data sheet.
• Wear the prescribed protective clothing.
• Do not eat or drink whilst working.
1. Remove operating fluids.
2. Dispose of the operating fluids in an environmentally sound manner in
accordance with the safety data sheets of the manufacturer.
Personnel: Authorized qualified personnel
Protective equipment:
1. Clean the assemblies and components in an approved manner.
2. Dismantle the assemblies in accordance with the pertinent local health,
safety and environmental regulations.
X-ray inspection system phoenix x|aminer
Dismantling and disposal
Protective gloves
Protective goggles
Protective clothing
Safety shoes
Protective gloves
Protective clothing
Safety shoes
93