APRILIA TUONO 1000 - 2006 Manual page 94

FORK
Factory setting is designed for any riding
condition, low or high speed, with reduced
or full load.
However, suspension setting may be
m o d i f i e d t o s u i t s p e c i f i c n e e d s i n
accordance with vehicle use.
WARNING
For a correct setting of adjusters (1-2-3),
first set the fork to the stiffest position
(turn the adjuster fully clockwise) then
set desired position (clicks and/or
turns).
94 use and maintenance TUONO 1000
2
Racing settings may only be used
during official competitions or sports
events authorized by the competent
authorities and taking place in closed
circuits or, anyway, away from public
roads.
It is strictly prohibited to carry out
adjustments for the use of the vehicle
on racetracks and then ride it on roads
or highways.
FRONT SUSPENSION
Hydraulic adjustment with extended shock
absorber, screw (1)
Hydraulic compression damping, screw (2)
Spring preload, nut (3)
Fork height (A) (***) over top yoke (not
including top cap)
(*) = clockwise
(**) = counterclockwise
(***) = Have this adjustment carried out exclusively by an Local aprilia Dealer
For racing we recommend to fit the Öhlins multi-adjustable front fork unit
purchase contact an Local aprilia Dealer.
USA
WARNING
Standard setting
Tighten fully (*) and then slacken (**)
by 1.5 turns
Tighten fully (**) and then slacken (*)
1 turn
Tighten fully (*) and then slacken (**)
5 notches are in view
1 notch is in view
. For